Connecting Links
Chain Connecting Link, in other names like, double ring buckle, butterfly buckleand connecting ring, is mainly used to connect the chain, lifting ring and hooksin chain rigging. It is widely used in metallurgy, steel, electric power, port and other industries. Made by alloy steel or stainless steel, connecting linksare normally used with grade 8/grade 10 lifting chains or stainless steel chains to make one leg or multiple legs chain sling. In some special occasions, the connecting links are also used to connect two pieces chain together to get a longer distance.
Following steps below to assemble the Connecting Link,:
Step 1: Take a new piece of connecting chain. Visual check and be sure it’s in good condition for service. Take off the pin to separate the link as two parts.
Step 2: Put the chain link in one half link and the chain hooks or rings or other end fittings into the other half link, then cross the clevis head.
Step 3: Put the sleeve in the middle and insert the pin through the holes on clevis end and the pin sleeve.
Step 4: Drive the pin end with a soft hammer until the pin end is flush with the outside of the connecting link to get the pin locked tight.
There are many lifting equipment manufacturers, but we are one of the best choices for you. Contact us to buy lifting chainand know more.
Send product request
Other supplier products
 |
Master Links And Sub Assemblies | Master linksand Sub Assemblies are the main links to construct single leg or multiple leg lifting slings. Working as the control link, these links ... |
 |
Services | Bioanalytical Service Bioanalytical Service for Small Molecule Drugs and Metabolites, Large Molecules – Peptides and Proteins, etc. LCMSMS Q... |
 |
PML Lifting Maganet | Featured with a built-in strong permanent magnet circuit, TITIANSUHElifting clamps suppliers permanent lifter magnetis designed to handle steel pla... |
 |
Thermal Shock Chamber | Thermal Shock Chamber Thermal shock chambers perform tailored environmental stress screening of component and board electronic assemblies. Thermal ... |
 |
Dolly Skate Roller | Dolly skate rolleris a machine handling tool to move in short distances and install machines, equipment, furniture, heavy cargo, etc. By placing it... |
Same products
 |
MFS-160A 1-8KHZ 160KW 250A Medium Frequency Induction Heating Machine | Seller: Chengdu Jinkezhi Electronic Co., Ltd | MFS-160A medium frequency induction heating machine inverter uses IGBT as the core component. The... |
 |
MFS-120A 1-8KHZ 120KW 182A Medium Frequency Induction Heating Machine | Seller: Chengdu Jinkezhi Electronic Co., Ltd | MFS 120A induction heating power supply adopts IGBT as the core component. As a medium frequency ... |
 |
Medium Frequency Induction Heating Machine | Seller: Chengdu Jinkezhi Electronic Co., Ltd | If you need hot forging for large workpieces, smelting for ferrous or non-ferrous metals or deep ... |
 |
High Frequency Induction Heating Machine | Seller: Chengdu Jinkezhi Electronic Co., Ltd | The working frequency of CX series ultra high frequency induction heating machinecovers 50KHZ ~ 1... |
 |
CX2030C 50-120KHZ 30KVA 23A High Frequency Induction Heating Machine | Seller: Chengdu Jinkezhi Electronic Co., Ltd | CX2030C 50-120KHZ high-frequency MOSFET type induction heater holds the output power of 15KW/30KV... |
