PU Ab Epoxy 10: 1 High Precision Manual Glue Dispenser Dispensing Machine with Glue Gun
PUAbEpoxy10: 1 High Precision Manual GlueDispenserDispensingMachinewith Glue Gun
1. It has the functions of continuous interpolation of points, lines, surfaces, arcs, circles, irregular curves and three-axis linkage, and can be adapted to glue filling of any irregular objects;
2. Ultra-large hard disk storage memory capacity, unlimited program storage, no need to reprogram, and the software has functions such as area array, translation and rotation operations;
3. The glue amount, thickness, glue coating speed, glue dispensing time, and glue stop time can all be set by parameters. The glue output is stable and there is no leakage of glue;
4. Optional CCD visual programming system to achieve fast programming;
5. The three functions of glue dispensing, glue filling and track potting are integrated and operated fully automatically;
6. Proportion as needed to achieve glue filling while mixing, maximizing glue savings;
7. Double barrel design, A glue and B glue are stored separately to ensure that the glue will not solidify if left for a long time;
8. The mixing ratio is adjustable from 1.:1 to 10:1, using static or dynamic mixing to ensure uniform and complete mixing;
9. The unique control system is not affected by air pressure factors and avoids uneven glue dispensing, wire drawing, bubbles and other phenomena;
10. A variety of glue filling modes can be freely switched. You can pour glue A, glue B, or glue AB individually. You can also manually fill glue A, glue B, or glue AB. If you have special requirements, you can use multi-stage quantitative filling. The glue mode can perform up to five stages of quantitative glue filling (the glue output and speed of each stage can be set separately)
11. Equipped with automatic feeding and suction functions to save manual feeding time and improve work efficiency;
12. The storage barrel is equipped with a liquid level sensor switch, which automatically alarms when the material is insufficient or full, and automatically shuts down for protection when the material is insufficient.
13. Equipped with glue stirring, optional heating and reserved vacuum degassing function, it is suitable for different types of filling processes.
14. Equipped with output counting, single piece timing and operation monitoring and alarm functions
15. The AB pump pulse coefficient setting wizard function is convenient for adapting to different types of glue from different manufacturers.
16. Reserved for stuck pump detection and flow monitoring functions. Optional for customers with high glue ratio and small error range
17. Intelligent automatic cleaning function, multiple modes of automatic cleaning to adapt to different environments.
18. The anti-curing procedure prevents the equipment from suspending glue filling and the glue hardening to block pipes and valve bodies.
19. Cleaning agent recycling system can improve cleaning agent utilization and effectively reduce waste.
20. The unique glue anti-curing mode can effectively prevent the mixing head from curing due to employee negligence.
multifunctional fully automatic glue potting machine is suitable for:
glue potting machine is widely used in LED lamps, P10 light panels, displays, LED drive power supplies, waterproof power supplies, modules, transformers, relays, chargers, ballasts, buzzers, clutches, solar junction boxes, Glue potting of communication junction boxes, battery middle covers, electronic and electrical products, crystal crafts, glue filling and packaging of transformers, potting of ion generators, etc.
suitable for glue:
Suitable for two-component 1:1-10:1 epoxy resin, organic silicone gel, crystal glue, polyurethane PU glue and other two-component glues
在线联系供应商
Other supplier products
 |
Epoxy Ab Glue Machine 2K Mixing and Dispensing Machine | ab glue mixing and dosing machinePotting and encapsulation is the process of embedding products & assemblies in a liquid resin (potting compoun... |
 |
Glue Spraying Machine for Insulation Integrated Board Production Line MGO Panels Fire-Proof Door | Glue Spraying Machine for Insulation Integrated Board Production Line MGO Panels Fire-Proof Door The glue Spraying line is based on the reform o... |
 |
Cantilever-type glue MGO SIP Panel laminating line for XPS Insulation Board/Magnesium Oxide Structural Insulated Panel | Cantilever-typeglueMGO SIP Panel laminating line for XPS Insulation Board/Magnesium Oxide StructuralInsulated Panel The glue Spraying line is ba... |
 |
2 Part Metering Mixing and Dispensing Machine PU Resin Dynamic Polyurethane Dosing System Automatic Epoxy Resin Filling Machine Electronic Potting Machine | What is the difference between 2K AB adhesive materials manual potting machine and robot pottingmachine ? AutomaticAB potting machine is composed ... |
 |
Metering Mixing and Dispensing Machine PU Resin Dynamic Polyurethane Dosing System Automatic Epoxy Resin Filling Machine. ... Ab Component Two Part Glue Dispensing Potting Epoxy Silicone PU Resin Mach | Metering Mixing and DispensingMachinePUResin Dynamic PolyurethaneDosingSystem Automatic Epoxy Resin FillingMachine....AbComponent TwoPartGlue Dis... |
Same products
 |
MFS-160A 1-8KHZ 160KW 250A Medium Frequency Induction Heating Machine | 卖方: Chengdu Jinkezhi Electronic Co., Ltd | MFS-160A medium frequency induction heating machine inverter uses IGBT as the core component. The... |
 |
MFS-120A 1-8KHZ 120KW 182A Medium Frequency Induction Heating Machine | 卖方: Chengdu Jinkezhi Electronic Co., Ltd | MFS 120A induction heating power supply adopts IGBT as the core component. As a medium frequency ... |
 |
Medium Frequency Induction Heating Machine | 卖方: Chengdu Jinkezhi Electronic Co., Ltd | If you need hot forging for large workpieces, smelting for ferrous or non-ferrous metals or deep ... |
 |
High Frequency Induction Heating Machine | 卖方: Chengdu Jinkezhi Electronic Co., Ltd | The working frequency of CX series ultra high frequency induction heating machinecovers 50KHZ ~ 1... |
 |
CX2030C 50-120KHZ 30KVA 23A High Frequency Induction Heating Machine | 卖方: Chengdu Jinkezhi Electronic Co., Ltd | CX2030C 50-120KHZ high-frequency MOSFET type induction heater holds the output power of 15KW/30KV... |
