.

Walk In Test Chamber For CATL Battery

CATL Battery Walk In Test Chamber
JOEO Walk In Test Chamber's temperature cyclic stress screening is to change the external environmental stress by using the temperature acceleration technique (the product produces alternating expansion and contraction when circulating in the upper and lower extreme temperatures) under the design strength limitation, so as to generate thermal stress and strain in the product.
It can set different stress screening temperature change rate.If you need more models about our test equipment, please reference our chamber-testing(.)com 5℃/min,10℃/min,15℃/min,20℃/min
Walk In test chamber(ESS chamber) is suitable for the whole product, parts and materials for high temperature, low temperature, high and low temperature cycling & temperature stress screening (ESS) test and constant humidity and cyclic damp heat test.

Meeting standards
MIL-STD-2164, MIL-344A-4-16, MIL-2164A-19, NABMAT-9492,GJB-1032-90, GJB/Z34-5.1.6, IPC-9701

SAFETY IN THE LABORATORY AND PROTECTION OF THE STAFF
During the temperature tests, overchargings or malfunctions of the batteries may occur. This can lead to the destruction of the batteries.

Increasing storage sizes cause increasing impacts of possible failures and potential risks during tests with lithium batteries. For this reason, safety in the laboratory, in particular the protection of the staff, during such tests has the highest priority.

To assure this safety in your lab chamber during tests with lithium batteries in a temperature- or environmental humidity chamber, we can offer safety devices. Here, JOEO BatteryWalk In Test Chamber following customers demand that the safety test chambers can be adapted individually, Please feel free to inquiry from us online!

JOEOSPECIAL ADD-ON COMPONENTS CAN BE SUPPLEMENTED FOR TESTING LITHIUM-ION BATTERIES
Electrical door lock system
Optic and acoustic alarm
Pressure release flap
N2 – Inertia Unit
O2 – Measuring (additional option for N2 – Inertia)
Fire detection system using a CO gas detection sensor
Fire detection via temperature measurement (alternative)
Flushing device using in case of fire
Over pressure release via burst disc including reinforced inner container

REFRIGERATION SYSTEM
In the process of cooling, from 150℃ we just turn on the first compressor, when the temperature down to 17℃, the second compressor will start to work.In this way, we not only can guarantee the cooling rate, but also energy saving, and extend the life of the compressor.
JOEO Battery walk in test chamber's Compressors equipped with world famous brand such as Tecumseh (France made), Bitzer or GEA BOCK (Germany made).
Shock absorption and noise reduction process,slow down the vibration, protect the compressor.The new pipe bending technology: The bending process can minimize the connector point and make refrigerant flow more efficiently.
It applies Denmark DANFOSS and Japanese SAGLNOMIYA solenoid valves to improve the overall reliability of the equipment.



在线联系供应商

至: Guangdong ALI Testing Equipment Co,.Ltd
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

IPX 3 4 Rain Test Chamber
IPX 3 4 Rain Test Chamber Application JOEO rain testing equipment,water spray test chamber,ip test chamber,rain test chambers is used to test the rain proof and waterproof p...
Acceleration Mechanical Shock Test Machine
Acceleration Mechanical Shock Test Machine Application Acceleration mechanical shock testing machine is designed to measure and ensure the impact performance of products and packaging, simul...
PHSS15 Series Pneumatic Horizontal Shock Response Spectrum Test System
PHSS15 Series Pneumatic Horizontal Shock Response Spectrum Test System PHSS15 series is the state-of-the-art shock response spectrum tester that adopts compressed gas energy toprovide impact energy, push the shock hamm...
JOEO Stability Climate Test Chambers Pharmaceutical Stability Chambers
JOEO Stability Climate Test Chambers Pharmaceutical Stability Chambers Application Scientific method for long-term drug failure evaluation to create a stable temperature, humidity and light environment, accelerate drug...
约奥环境试验室制造商 气候试验室
约奥环境试验室制造商 气候试验室 应用 JOEO湿度试验箱、气候控制试验箱、环境模拟试验箱专为测试耐热、耐寒、耐干、耐湿能力而设计,适用于电子、电器、LED等行业的质量控制。 、IC芯片、车辆、金属、食品、塑料制品、化学、建材、箱包、胶带、印刷、包装等。 描述 JOEO环境试验设备、湿度控制室、冷热冲击试验箱、调温试验...
供应产品

Same products

Temperature & Humidity Transmitter
Temperature & Humidity Transmitter 卖方: Tinko Instrument (Suzhou) Co., Ltd. Tinko high temperature humidity transmitterare suitable for HAVC temperature and humidity measure...
PDC DRAG BIT
PDC DRAG BIT 卖方: WUHAN SML TOOLS LIMITED The PDC drilling drag bitis a composite of four main components: the bit body, the drag blade, th...
Achromatic Lens
Achromatic Lens 卖方: TianCheng Optics CO.,Ltd Achromatic Lensfor Sale An achromatic lensis a lens that is designed to limit the effects of chr...
GH-SW640Pro-U3 SWIR Camera
GH-SW640Pro-U3 SWIR Camera 卖方: GHOPTO GH-SW640Pro-U3 SWIR Camera The SWIR Cameraseries feature a 640 x 512 pixel InGaAs focal plane ar...
OCS-02 Crane Scale
OCS-02 Crane Scale 卖方: ZHEJIANG HAOYU INDUSTRY & TRADE CO.,LTD Hanging Scale 100 kg which is specially designed for Cranes or used by Hanging by making it compa...