TJL-8 Column Type Rod End Load Cell
With the characteristics of the wide range of measurements, safe and reliability, our column-type tension cheap load cellis suitable for the measurement and control of electronic scales, lifting equipment and various force values.
TJL-8 Column Type Rod End Load CellSpecifications
|
Technical Parameter |
|
|
Rated Load |
100~3000 kN |
|
Comprehensive Precision |
|
|
Sensitivity |
|
|
Creep |
±0.05% FS/30min |
|
Zero Output |
±1% FS |
|
Temperature Effect On Zero |
±0.05% FS/10℃ |
|
Temperature Effect On Output |
±0.05% FS/10℃ |
|
Operating Temperature Range |
-20~+65 ℃ |
|
Input Resistance |
380±10 or 750±15 Ω |
|
Output Resistance |
350± 3 or 750± 5 Ω |
|
Insulation Resistance |
＞5000 MΩ |
|
Safe Load Limit |
150% FS |
|
Bridge Voltage |
Reference 10V DC |
|
Material |
Alloy Steel |
|
Load Cell Mode Of Connection |
Input+: Red |
|
Input-: Black |
|
|
Output+: Green |
|
|
Output-: White. |
|
Send product request
Other supplier products
 |
Diffused Silicon Pressure Sensor | The cavity has high accuracy and a wide range; the cavityless is easy to clean and is suitable for liquid pressure measurement with impurities. Pre... |
 |
Rope Tension Load Cell | A rope tension load cellis a sensor that indirectly measures tension. The biggest feature of this kind of load cell is that there is no need to rep... |
 |
Column Type Tension Load Cell | Column type tension load cellis a common type of tension load cell. Our company has two types of column type tension load cells, internal thread an... |
 |
TJL-4 Column Type Tension Load Cell | With the characteristics of imple structure, high reliability and good interchangeability, the column type tension wireless load cellis suitable fo... |
 |
TJH-2B Parallel Beam Load Cell | The product is adjusted at the four corners to ensure that it outputs consistently at all points in the specified load plane. Suitable for packagin... |
Same products
 |
Extrusion gearbox shaft use the tandem roller Bearing F-81616T4AR | Seller: JinHang Precision Bearing Co.,LTD | The bearing F81616T4AR mainly used for the high speed extruder machine gearbox shaft. It consisit... |
 |
LEFOO AIR COMPRESSOR CUT OFF SWITCH | Seller: LEFOO INDUSTRIAL CO.,LTD. | Air Compressor Cut Off Switch Pressure Range: 15~60psi / 40~250psi / 400~500 psi Stable and acc... |
 |
Lefoo 115VAC RO Diaphragm Booster Pump | Seller: LEFOO INDUSTRIAL CO.,LTD. | Low vibration and low noise, self-priming and stable pressure feeding, LEFOO 115VAC RO Diaphragm ... |
 |
LEFOO BRUSHLESS RO BOOSTER PUMP | Seller: LEFOO INDUSTRIAL CO.,LTD. | This brushless RO booster pump series is powered by a permanent magnet brushless motor, 0.5/0.7 M... |
 |
LEFOO PRESSURE TRANSMITTER MANUFACTURER | Seller: LEFOO INDUSTRIAL CO.,LTD. | A pressure Transmitter (pressure transducer) converts the physical quantity 'force per area' into... |
