SpO2 Monitoring Sensor
APK offers a broad portfolio of SpO2 sensor, including both reusable and disposable versions for different applications and Patient categories. The principle of pulse oximetry was developed by Nihon Kohden researcher Takuo Aoyagi in the early 1970s. Pulse oximetry measures blood oxygen saturation (SpO2) non-invasively with an infrared sensor on the fingertip. Before that, the measurement of blood oxygen saturation required arterial blood sampling. Thanks to pulse oximetry, the critical parameter of SpO2 can be measured painlessly, continuously, and in real-time. If you want to find professional and reliable SpO2 sensor suppliers, look no further than APK Technology.
Reusable SpO2 Sensor
Reusable SpO2 sensors are medical devices used to measure a patient's SpO2 levels. These SpO2 sensor types are designed to be cleaned and reused multiple times, making them a cost-effective and environmentally friendly option. There are several types of reusable SpO2 sensors, each designed for specific clinical applications and patient populations. Here are some SpO2 probe types for sale:
SPO2 probe Working Principle
How is SpO2 probe working? The reusable SpO2 sensor is mainly composed of a connector, cable, and sensor.
Compatible connector (appearance varies according to specific products)
Cables
Patient end sensor (appearance varies according to specific products)
SPO2 probe Uses
Intended to be used on corresponding parameter monitors or pulse oximeters by healthcare professionals to collect and transfer the SpO2 and pulse rate signals of the patient.
Plug the sensor into the monitor and verify proper operation as described in the manual.
Select a proper contact position of the patient for the sensor, the preferred position is the index finger, alternative recommends the thumb or little finger.
Reference to the instructions as below, the patient finger must be inserted correctly to the end of the sensor.
The cable of the SpO2 sensor should be placed along the patient's dorsal side and parallel to the arm.
Spo2 Sensor Specification
Specifications of Spo2 Sensor
SpO2 Testing Range: not lower than 70%~100%SpO2
Accuracy Range: Tolerance of ±2% when 90%-100%; ±3% when 70%-89%;
Pulse Rate Testing Range: no lower than (30~245)bpm; Pulse Rate Testing Accuracy±3bpm;
Wavelength (this information is especially useful for healthcare professionals ) Class A: Red 660nm, IR 905nm, Class B: Red 660nm, IR 940nm.
Working Conditions of Spo2 Sensor
Ambient Temperature：5℃~45℃;
Relative Humidity: ≤10%~95%（Non-Condensing）;
Atmospheric Pressure: 50kPa~106kPa.
Why Choose APK Technology SPO2 Sensor
For over 20 decades, APK Tech, the professional pulse oximetry sensor factory, has established itself as a pioneer in pulse oximetry, offering an extensive range of monitoring solutions. Healthcare professionals have placed their trust in the APK Tech for its unwavering commitment to delivering rapid, precise, and consistent pulse oximetry performance tailored to the diverse spectrum of patient requirements. From neonatal care to adults, APK Tech's dedication to these attributes has firmly positioned it as an esteemed leader in the field of sensor SpO2.
There are many medical accessories suppliers, but we are one of the best choices for you.
Send product request
Other supplier products
 |
Veterinary Monitoring Equipment | Veterinary monitor is a device or system that measures and controls the physiological parameters of a patient animal, can be compared with known se... |
 |
A-XT-04 Blue TPU Neonatal Bladder Cuff, Single Hose(Bladder 4x9cm, Limb cir=6~11cm) | Parameters of A-XT-04 Blue TPU Reusable NIBP Cuffs APK Part Number A-XT-04 Blue TPU Application Medical Patient Monitor... |
 |
A1411-SI01 Nihon Kohden Compatible Infant SpO2 Sensor with 90cm Cable DB9(9pin) | Parameters of A1411-SI01 Infant SpO2 Sensor APK Part Number A1411-SI01 OEM Part Number N/A OEM Manufacturer Nihon Kohden Description Nihon Kohden C... |
 |
A1318-SA129PV Mindray Compatible Adult Finger Clip Sensor with 260cm Cable 6-pin | Parameters ofA1318-SA129PVReusable mindray spo2 sensor APK Part Number A1318-SA129PV OEM Part Number N/A OEM... |
 |
APK20-001 Disposable Medical ESU Pencil Blue | Parameters of APK20-001 Disposable ESU PencilBlue APK Part Number APK20-001 OEM Part Number N/A ... |
Same products
 |
UM-A7 Clear Polyster Study Model | Seller: Tangshan UMG Medical Instrument Co.,Ltd. | UM-A7 Clear Polyster Study Model This tooth model UM-A7 Clear polyster teeth study modeluses tra... |
 |
UM-A6 Standard Tooth Model (Soft Gum 32 Teeth) | Seller: Tangshan UMG Medical Instrument Co.,Ltd. | UM-A6 Standard Tooth Model (Soft Gum 32 Teeth) Our company's product UM-A6 Standard tooth model(... |
 |
UM-A4 Standard Tooth Model (Soft Gum 28 Teeth) | Seller: Tangshan UMG Medical Instrument Co.,Ltd. | UM-A4 Standard Tooth Model (Soft Gum 28 Teeth) Our dental model UM-A4 Standard model of teeth wi... |
 |
UM-A3 Standard Teeth Model (nissin) | Seller: Tangshan UMG Medical Instrument Co.,Ltd. | UM-A3 Standard Teeth Model (nissin) Our UM-A3 Standard teeth model(nissin) is a dental model wit... |
 |
UM-A3F F Tooth Model | Seller: Tangshan UMG Medical Instrument Co.,Ltd. | UM-A3F F Tooth Model Our dental model UM-A3F fake teeth model, which is made of frasaco articula... |
