Waveguide Isolators
Dolph Microwave offers a standard product line of waveguide isolatorsranging from WR70 to WR 900. For more information feel free to call us and discuss your needs with one of our sales engineers.
Difference Between Circulator and Isolator
A circulator is direct the flow of microwave or radio-frequency signals in RF systems which is normally a 3 or 4-port components. The operational principle is transmits input signal from 1 port to the next, The ports can be as input signal, output signal or termination and generally have a line impedance of 50Ω.
An isolator is a circulator as well but the difference is it has only 2 ports that transfer a signal, while the third port has a termination resistor connecting with ground. It protects RF components from excessive signal reflection. If port A signal is well matched with port B, then the signal to port B lowest loss. If not match, the signal will pass to port C, which will be dissipated into heat. Port A is the input and port B is output.
Difference Between Circulator and Isolator
Application and Clarification of Waveguide Isolator
The isolator in microwave engineeringis a non-reciprocal two-port device that transmits electromagnetic waves in one direction, and the reverse transmission of the signal is isolation, so the isolator is also called an inverter.
In microwave systems, it is mainly used to control the transmission of electromagnetic wave signals in one direction, and at the same time reduce the influence of reflected signals on the system or on the source.
The typical specifications of the full-band isolator are shown in the table above, and the waveguide specifications, flanges, operating frequencies, indicators, etc. Can also be customized according to customers' requirements.
There are many microwave waveguide manufacturers, but we are one of the best choices for you.
Send product request
Other supplier products
 |
Earth Station Antenna | Communications system integrators and designers can bring their systems online faster, more economically, and with superior performance. In use aro... |
 |
Double Ridged Waveguide Twists | Flexible twistable waveguideis divided into left-handed and right-handed according to the twisting direction. The standard twisting angle is 90 &de... |
 |
Waveguide Horn Antennas | Dolph Microwavemanufactures a high quality line of waveguide gain horn antennas that are linearly polarized, lightweight and corrosion resistant. I... |
 |
Waveguide Phase Shifter | Dolph Microwave manufactures a high quality line of waveguide phase shifter, which is utilize hybrid design, making it ideal for high power and low... |
 |
Flexible Waveguide | Flexible Waveguide Dolph Microwave manufactures a quality line of flexible twistable/non-twistable waveguides, specially designed to meet all of y... |
Same products
 |
Precision Hot Air Oven | Seller: Guangdong Yuanyao Test Equipment Co.,Ltd. | Model: YPO-072 YPO-270 YPO-480 YPO-600 YPO-720 YPO-1000 Main Parameters: Temperature range: R... |
 |
Nitrogen Drying Oven | Seller: Guangdong Yuanyao Test Equipment Co.,Ltd. | Nitrogen ovencan provide an anaerobic environment for drying or baking samples. Normally we use c... |
 |
INDUSTRIAL MICROWAVE COMPONENTS | Seller: Dolph Microwave Co., Ltd. | Dolph Microwave offers a full line of industrial microwave products. Specializing in waveguide co... |
 |
Industrial Microwave Circulator | Seller: Dolph Microwave Co., Ltd. | Dolph Microwave offers a standard product line of Industrial Microwave Circulator for 915 and 245... |
 |
Flyaway Antenna | Seller: Dolph Microwave Co., Ltd. | Dolph Microwave Flyaway Antenna System incorporates precision assembled reflector panels with our... |
