Filter Cartridge Dust Collector
After the dust containing gas enters the dust hopper, due to the sudden expansion of the airflow section and the action of the airflow distribution plate, a part of the coarse particles in the airflow settle in the dust hopper under the action of dynamic and inertial forces.
After entering the filter chamber, the dust particles with fine particle size and small density are deposited on the surface of the filter material through brown diffusion and screening, and the purified gas enters the clean air chamber and is discharged by the exhaust pipe through the fan.
The resistance of cartridge filter increases with the increase of dust layer thickness.
Ash removal occurs when the resistance reaches a specified value.
At this time of PLC program control pulse valve opening and closing, lift valve closed, first one room will be truncated filtering flow, and then the electromagnetic pulse valve open, compressed air and a short time the case on the rapid expansion, the influx of cartridge, cartridge expansion deformation produces vibration, and under the action of reverse flow scouring, attached to the filter bag dust on the surface of the appearance, stripped fell into the hopper.
After the ash removal, the solenoid pulse valve is closed, the lifting valve is opened, and the filtration state of the chamber is restored.
Each room is carried out in turn, and the period from the first room to the next room is a cleaning period.
The dust falls into the dust hopper and is discharged by the ash discharge valve.
Send product request
Other supplier products
Wet type Dustless Sand Blaster | BT150 The BT150 holds up to 19 kg of water and 2.7 kg of abrasive which allows up to ~30 minutes of continuous blast time. This machine runs perfec... | |
Vertical Flaskless Sand Molding Machine | Vertical Flaskless molding machine introduction: FoundryVerticalFlasklessSandCastingMoldingMachineforManholecover:Verticalparting,nosandbox,fullau... | |
Wire Mesh Belt Shot Blasting Machine for Wheel Hub | Mesh belt type shot blasting machine is mainly used forsurface treatment and shot blasting strengtheningofthin wall casting, thin wall iron, alumin... | |
Steel Pipe Inner Wall Shot Blasting Machine | Steel pipe inner wall special sandblasting equipment shot blasting machine Regardingsteelpipewithdiameterof16~600mm,weadoptsVtypeconveyorwhichhavea... | |
Foundry Hot Box Sand Core Shooter | Hot box coreshooter refers to the product cured by heating, usually heating on the mold, also known as hot core box mold, through the core shooting... |