Wall Mount Electrical Flush Enclosure Roll Forming Machine
Metal roll forming machine electrical enclosure production line for flush mounting box, illumination distribuiton box, wall mounted enclosure, flush econo boards.
Shenzhen Superda Machine Co., Ltd Professionl electrical enclosure production line.
Metal roll forming machine production line making illumination wall mounted box dimension.
Push bottom box length is adjustable from 200-600mm, the width is 190mm, and the depth is 80mm. The actual cross-section of the product provided by the customer.
1, Flush mounted box production line technical parameters
No. | ITEM | PARAMETER | REMARK | |
1 | MATERIAL | Type | Cold-rolled strip steel, galvanized sheet | |
T.(mm) | 0.5-0.7mm | |||
Yield Strength (Mpa) | Q235 | |||
2 | Forming product Width | Customized | ||
3 | Forming speed (m/min) | 4-8m | Including hole | |
4 | Forming main power (KW) | 7.5 KW | FYR | |
5 | Hydraulic power (KW) | 18.5 KW | FYR | |
6 | Bending power (KW) | 3 KW | FYR | |
7 | Voltage | AC380V,50Hz,3P |
Metal roll forming machine production line process
Uncoiler →Straightening→servo feeder→Hydraulic press breach device → Guide device → roll forming machine → hydraulic punch →shear device (including knife)→ finished product rack
Steel flush mount enclosure roll Forming machine list
Explaination
This production line is equipment for production flush wall mount enclosure. The strip coil to be processed is manually placed on the uncoiler, and then corrected and tensioned. After leveling, it enters the hydraulic pre-punching and punching notch, and is sent to the forming machine by the guide device to form. Under the frictional damping action of the forming roller and pressure roller, after entering the shearing section at a linear speed of 0-10m, the product is cut off as required, and then manually packed away.
Metal Enlosure roll forming machine production line technology advantage.
Box roll forming machine accuracy
a. Shear length tolerance: ≤±0.3mm/m
b. Width tolerance: ≤± 0.3mm
c. Bending: ≤2mm/m
d. Burr: ≤0.1mm (new cutting edge cuts carbon steel plate in reasonable clearance)
e. Height tolerance: ≤±0.3mm
bove tolerance with flat edgeless one-stage steel coil As a prerequisite.
Surface quality: The surface of the finished product after processing does not add any processing defects.
Send product request
Other supplier products
Meter Board Roll Forming Machine | Electrical distribution board roll forming machine productionline process Shenzhen Superda Machine Co., Ltd Electrical Meter Board Roll Forming Ma... | |
Electrical Panel Manufacturing Machine | Steel electrical panel manufacturing machine projector solution Superda Machine design for fabricating all kinds of electrical industry panel, cab... | |
Electrical Enclosure Roll Forming Machine | Export Oversea Electrical Box Machine Form Making Different Size Distribution Board Enclosure. Produced wall mount box dimension, height adjustabl... | |
Metal Tube Shaped Forming Machine For Flat Sided Oval Tube | Shenzhen Superda Machine Co., Ltd making all kinds of steel tube process machinery for oval, square, rectangular, D shaped, hollow angle, triangle ... | |
Square Tubing Machine | Shenzhen Superda Machine Co., Ltd Professional steel tube forming shaped machine. 3*3cm/4*4cm/2inch Square tube & Rectangle Pipe forming machi... |
Same products
MFS-160A 1-8KHZ 160KW 250A Medium Frequency Induction Heating Machine | Seller: Chengdu Jinkezhi Electronic Co., Ltd | MFS-160A medium frequency induction heating machine inverter uses IGBT as the core component. The... | |
MFS-120A 1-8KHZ 120KW 182A Medium Frequency Induction Heating Machine | Seller: Chengdu Jinkezhi Electronic Co., Ltd | MFS 120A induction heating power supply adopts IGBT as the core component. As a medium frequency ... | |
Medium Frequency Induction Heating Machine | Seller: Chengdu Jinkezhi Electronic Co., Ltd | If you need hot forging for large workpieces, smelting for ferrous or non-ferrous metals or deep ... | |
High Frequency Induction Heating Machine | Seller: Chengdu Jinkezhi Electronic Co., Ltd | The working frequency of CX series ultra high frequency induction heating machinecovers 50KHZ ~ 1... | |
CX2030C 50-120KHZ 30KVA 23A High Frequency Induction Heating Machine | Seller: Chengdu Jinkezhi Electronic Co., Ltd | CX2030C 50-120KHZ high-frequency MOSFET type induction heater holds the output power of 15KW/30KV... |