Tungsten Metal Bar
Pure tungsten baris made of 99.95% tungsten powder. Its physical properties are as follows: density 19.3g/cm3, melting point (liquid) 3422°C, conductivity 30% IACS Min, hardness 69HRA Min. The forging and annealing process results can be obtained by test. It possesses special properties such as low thermal expansion with good thermal conductivity, adequate resistance to electrical resistance, and high elastic modulus.
Specification of Tungsten Metal Bar
|
W |
Al |
Ca |
Fe |
Mg |
Ni |
C |
Si |
N |
|
|
W1 |
≥99.95% |
||||||||
|
W2 |
≥99.92 |
Application of Tungsten Metal Bar
Tungsten rods possess special properties, such as low thermal expansion with good thermal conductivity, adequate resistance to electrical resistance, and high elastic modulus. Therefore, tungsten rods are widely used in various fields. Such as support line, lead line, printer needle, various electrodes and quartz furnace, filament, high speed tools, automotive automatic products, sputter target material.
Application of Tungsten Metal Bar
Production Process of Tungsten Metal Bar
Production Process of Tungsten Metal Bar
Mechanical processing: the tungsten products can be turned, milling, planing, grinding, forging,
Pressure processing: generally, the elongation of rotary forging is about 100% after billet opening, and it enters the ordinary rotary section. After continuing to deform 200%, it enters the drawing.
Production: Generally using powder metallurgy method of production, powder - pressing molding - sintering.
Features of Tungsten Metal Bar
It’s anticorrosive properties are very good, and most inorganic acids have little erosion on it. In air it forms a protective layer of oxide on its surface, but at high temperatures it is completely oxidized. A small amount of tungsten can greatly increase the hardness of steel.
It has a very high melting point, the highest of all non-alloy metals. Pure tungsten is mainly used in electrical and electronic equipment, and many of its compounds and alloys are also used in many other applications (most commonly in light bulb filaments, in X-ray tubes, and in superalloys).
There are many refractory metal suppliers, but we are one of the best choices for you.
Send product request
Other supplier products
 |
Molybdenum Metal Bar | High quality prue molybdenum bar for sale! As a typical product of the insoluble metal Mo, molybdenum bar is a rod mainly made of molybdenum. There... |
 |
Tungsten Rod | HSG METAL is a professional tungsten rod manufacturer and tungsten rod factoryin China. Pure tungsten rod is made of 99.95% tungsten powder. Its ph... |
 |
Tungsten Metal Bar | Pure tungsten baris made of 99.95% tungsten powder. Its physical properties are as follows: density 19.3g/cm3, melting point (liquid) 3422°C, c... |
 |
Services | Bioanalytical Service Bioanalytical Service for Small Molecule Drugs and Metabolites, Large Molecules – Peptides and Proteins, etc. LCMSMS Q... |
 |
Tungsten Sheet | Tungsten content ≥99.95% total of other elements ≤0.05% content of a single element ≤0.01%. Tungsten sheet metalApplication fields: ... |
Same products
 |
Torsion Spring Clip | Seller: ningbo atlas metal hardware co ltd | Torsion Spring Clip We manufacture close tolerance parts with complex geometries, intricate deta... |
 |
Torsion Spring | Seller: ningbo atlas metal hardware co ltd | Torsion Spring A torsion springis a spring that works by twisting its end along its axis; that i... |
 |
Threaded Parts | Seller: ningbo atlas metal hardware co ltd | Threaded Parts We have rich experience in machining stainless steel, Titanium alloy, aluminium, ... |
 |
Tension Spring | Seller: ningbo atlas metal hardware co ltd | Adjustable Tension Spring Tension springs are wound helical coils that are wrapped tightly toget... |
 |
Stepped Steel Shaft | Seller: ningbo atlas metal hardware co ltd | Stepped Steel Shaft Approved by ISO9001, we introduce advanced equipments from Germany and Japan... |
