Cassava Presser

• 

Cassava Presser

ZTZY screw progressive extrusion separator is a continuous operation press separator for organic material extrusion liquid and inorganic material slag liquid separation. The separator belongs to the third generation screw extruder, but it is not a simple transformation and upgrading of screw extruder, but a subversive design and change. The screen is not blocked and has no requirement for feed concentration, viscosity, hardness, astringency, particle size and fiber length. It can be widely used for pressing various raw materials.

The press can run stably and smoothly, with low failure rate, low operating and maintenance costs (non-stressed and protective extrusion of the screen), and extremely high juice yield and dewatering rate. Its press separation performance can be excellent on any type of press and centrifuge on the market. The juice yield of some fruits and vegetables reaches 85%, and the core juice is also a unique function. Some materials have a dryness of 20% after dehydration, showing the magical effect that is difficult to achieve with ordinary presses or dewatering machines. The use or extraction of juice brings considerable economic benefits. Its high crushing efficiency, the cost of input can be recovered in about one season, and it has a very high cost performance, so "choose to create value."

Pressing concept

Press dry, press clean, zero discharge, squeeze the last drop of liquid.

Three Elements of Press Selection

Feeding, discharging and slag discharging. Most of the videos on the Internet, people only see the liquid, followed by the feed, most of them do not see the slag. The liquid output seems to be large, in fact, the key is to see the slag, because any squeezer can do the liquid, but its effect can not last. Most crushers are prone to slip and return at the feeding end, resulting in extremely slow slag discharge, or even failure to come out. They are prone to jam and blockage, which is quite troublesome. If you hear the abnormal noise of the liquid sieve, you should give up decisively, because the service life of the sieve is very short, and the later maintenance cost is very high. The ZTZY extrusion separator effectively avoids all the disadvantages mentioned above.

Other supplier products

	Cassava Grinding Machine	Features of Cassava Grinding Machine Processing Capacity: 3-6Tons/hour Application Scope: Grating the cassava into the slurry. Product Introduction...
	Cassava Peeling Machine	Features of Cassava Peeling Machine Processing Capacity: 4-6Tons/hourApplication Scope: Fresh cassava peeling and washingProduct Introduction: Cas...
	Cassava Sieving Machine	During the production process of cassava starch, the sieving section is used to separate the fine residues(fiber) from the cassava slurry, remove t...
	Cassava Grater Machine(Cassava Grinding Machine) 2019	Features of Cassava Grater Machine(Cassava Grinding Machine) Processing Capacity: 3-6Tons/hour Application Scope: Grating the cassava into the slur...
	Dewatering and Drying System	The section of dewatering and drying has come to final steps of cassava processing, the vacuum dehydrator can remove as much moisture as possible a...

Same products

	TITANIUM SHEET	Seller: Gallianz (Anhui) New Materials Co., Ltd.	TITANIUM SHEET Titanium is known as "the metal of the future". At present, some people call tita...
	STAINLESS STEEL SHEET	Seller: Gallianz (Anhui) New Materials Co., Ltd.	STAINLESS STEEL SHEET Stainless steel (ss) is an alloy, which is iron-based and contains various...
	STAINLESS STEEL CLAD PLATE	Seller: Gallianz (Anhui) New Materials Co., Ltd.	STAINLESS STEEL CLAD PLATE The carbon steel sheet is bonded with stainless steel sheet on one or...
	SPECIAL METAL SHEETS	Seller: Gallianz (Anhui) New Materials Co., Ltd.	SPECIAL METAL SHEETS Looking for a special steel platemanufacturer? Welcome to Gallianz Group! B...
	ROLL BONDED CLAD PLATE	Seller: Gallianz (Anhui) New Materials Co., Ltd.	ROLL BONDED CLAD PLATE The Roll Bonded Clad Plateis the metal clad plate processed under the rol...