.

Horizontal Thermal Test Chamber

Application
JOEO horizontal thermal test chamber is the best choice for batch testing and large test loads. The interior design is used for custom environmental stress screening of components and board level electronic components. The carrier basket transfers loads between hot and cold zones in two - or three-zone configurations, and is widely used in automotive, electronic and electrical, aerospace, communication equipment, medical equipment and other industries.If you need more models about our test equipment, please reference our chamber-testing(.)com


Meet Standards

IEC 60068-2-14 Nc - Rapid change of temperature, two-fluid-bath method
MIL-STD-883J Method 1011.9 - Military standard, test methods for microcircuits Thermal Shock
MIL-STD-202 Method 107 - Military standard, test methods for electronic and electrical component parts Thermal Shock
JESD22-A106B - Thermal Shock
IEC 60749-11 - Semiconductor devices, Mechanical and climatic test methods Part 11: Rapid change of temperature, Two-fluid-bath method
EIAJ ED-4701/307 - Environmental and endurance test methods for semiconductor devices Thermal Shock

Description
JOEO Horizontal thermal test chamber are available in a variety of configurations and are the right solution for all thermal shock test requirements for large or batch products.

Two zones, single capacity (-2)
(One hot zone and one cold zone)
The product in the test moves through a carrying basket, alternating between hot and cold zones.

Two-zone Dual Capacity (-2D)
(Two hot zones and one cold zone)
In a two-zone, two-capacity system, the cold zone is always in use, which helps to improve system efficiency.

Three zones, single capacity (-3)
(One hot zone, one normal zone and one cold zone)
In the horizontal three zones, the product moves through the carrier basket between the cold zone and the normal temperature zone, and the hot zone moves to surround the product basket.


Feature

The reference test load of the JOEO thermal test chamber is composed of 12 steel plates. Each pound of steel has an exposed surface area of 65 square inches. The test load is oriented in the product carrier, with the airflow parallel to the steel plate. The load is distributed between two product carriers.
The weight of any additional racks must be included in the test load shown above.
The capacity depends on the stability of the product at extreme temperatures before transfer. Do not use environment dwell time.
When assisted by liquid nitrogen, smaller mechanical refrigeration systems will maintain low temperatures. Liquid nitrogen is required to meet the recovery time.
For a liquid nitrogen only thermal chambers, the maximum load is liquid nitrogen cooling without mechanical cooling.
Use IC chip product loading to recover 9 point products in 15 minutes or less. The load is distributed between two product carriers.



在线联系供应商

至: Guangdong ALI Testing Equipment Co,.Ltd
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Vibration Test Systems MIL STD 810G Test Shaker
Vibration Test Systems MIL STD 810G Test Shaker Application MIL STD 810G vibration test systems is produced by the famous brand JOEO ALI testing equipment company and is used to test some of the ...
Solid Walk In Test Chamber
Solid Walk In Test Chamber Application: JOEO solid walk in test chamber is an all-welded test chamber with an integrated construction that ensures durability for extreme test...
Sand Dust Test Chamber
Sand Dust Test Chamber Application JOEO blowing sand and dust test chamber is capacity of 1000 liters. Considering that some specimens are smaller, following the marketin...
Salt Mist Test Chamber(Salt /Temperature /Humidity)
Salt Mist Test Chamber(Salt /Temperature /Humidity) 申请 该复合循环腐蚀试验室可进行传统的盐喷、干湿交替混合盐喷试验以及大多数汽车循环腐蚀试验。它是专门设计和装配的,以满足控制标准的要求,控制盐喷,相对湿度,空气干燥,凝结湿度,自动喷洒,盐水浸没,旋转喷洒,和低温。盐喷雾柜用于测试涂料涂装件、金属组件、电子组件、光电涂装件等。如果您需要更多...
PBT20 Pneumatic Bump Test Machine
PBT20 Pneumatic Bump Test Machine The PBT20 series pneumatic bump test machine replaces the traditional mechanical cam-type crash benchand is suitable for repeated impacts on electr...
供应产品

Same products

Walk In Environmental Chamber
Walk In Environmental Chamber 卖方: Guangdong ALI Testing Equipment Co,.Ltd Application JOEO Multi-functional walk in environmental chamber is the perfect testing place for ...
Solid Walk In Test Chamber
Solid Walk In Test Chamber 卖方: Guangdong ALI Testing Equipment Co,.Ltd Application: JOEO solid walk in test chamber is an all-welded test chamber with an integrated con...
Compact Walk In Environmental Chamber
Compact Walk In Environmental Chamber 卖方: Guangdong ALI Testing Equipment Co,.Ltd Application JOEO compact walk in environmental chamber is used to test full-size solar panels or ...
Drying Walk In Environmental Chamber
Drying Walk In Environmental Chamber 卖方: Guangdong ALI Testing Equipment Co,.Ltd Application Dry walk in environmental chambers are a special type of walk in environmental chambe...
Walk In Test Chamber For CATL Battery
Walk In Test Chamber For CATL Battery 卖方: Guangdong ALI Testing Equipment Co,.Ltd CATL Battery Walk In Test Chamber JOEO Walk In Test Chamber's temperature cyclic stress screening...