Z10003 0.96 Inch LCD Display 128*64 4 Lane SPI Interface
Size: 0.96 inch
Resolution: 80*160
Interface: 4 lane SPI
Driver IC: ST7735R
View Angle: IPS
Brightness: 300 cd/m²
Touch Panel: Support CTP/RTP
Supply Type: Factory/Manufacturer
Certification: ISO9001, IATF16949, ROHS, REACH
Overview of Z10003 0.96 Inch LCDDisplay 128*64 4 Lane SPI Interface
1
Z10003 is a color active matrix thin film transistor (TFT) liquid crystal display (LCD) with 80*160 resolution. IPS (In-plane Switching) technique make this 0.96" LCD module have a wider view angle. This LCD display is built-in ST7735R driver IC. This a-Si TFT LCD come with 4-wire SPI interface.
2
If you have special requirement, like drive IC, interface, FPC, touch panel, backlight, etc, we can also customize for you.
3
Our factory carry out ISO 9001: 2015 and IATF16949: 2016 quality standard system strictly, all the LCD display passed ROHS, REACH Certification.
4
The 0.96" LCD screen is widely used smart watch, bracelet, medical oximeter, cosmetic instrument, household appliance, translator, etc.
Specification of 0.96 Inch LCD Display 128*64 4 Lane SPI Interface
Item |
Main Display |
Unit |
Number of Pixels |
80 * RGB * 160 |
Pixel |
LCM Outline Dimension |
mm |
|
LCD Outline Dimension |
mm |
|
Active Area |
mm |
|
Pixel Pitch |
mm |
|
Display Mode |
Normally Black |
|
Pixel Arrangement |
RGB Vertical stripe |
|
Viewing Direction |
ALL |
|
Color Configuration |
RGB |
|
LCD Transmittance |
Typ: 4.89%; Min: 4.4% |
|
LCD Contrast Ratio |
Typ: 800; Min: 640 |
|
FPC Version |
Z10003-P12 V1 |
|
Interface |
4 LINE SPI |
|
Operating Temperature |
-20℃ ~ 70℃ |
|
Storage Temperature |
-30℃ ~ 80℃ |
|
Backlight Arrangement |
1 LED |
|
Luminance |
- |
|
Weight |
- |
Pin Definition of 0.96 Inch LCD Display 128*64 4 Lane SPI Interface
PIN NO. |
PIN DEF. |
FUNCTION DECS. |
1 |
GND |
Ground |
2 |
LED-K |
POWER SUPPLY- FOR BACKLIGHT CATHODE |
3 |
LED-A |
POWER SUPPLY+ FOR BACKLIGHT ANODE |
4 |
VCC(3.3V) |
Power Supply for Analog, VCC 3.3V. |
5 |
GND |
Ground |
6 |
GND |
Ground |
7 |
D/C |
Display data/command selection pin in 4-line serial interface. |
8 |
CS |
Chip selection pin; Low enable, High disable. |
9 |
SCL |
This pin is used to be serial interface clock. |
10 |
SDA |
SPI interface input/output pin. The data is latched on the rising edge of the SCL signal. |
11 |
RESET(3.3V) |
This signal will reset the device and it must be applied to properly initialize the chip. Signal is active low. |
12 |
GND |
Ground |
As a professional china lcd display supplier, Zhunyi has high-quality china lcd display modulefor sale. Welcome to contact us if needed.
Send product request
Other supplier products
Android LCD Display | Android LCD Display Size: All Resolution: All System: Android LCD type: TFT Touch screen: CTP/RTP OEM/ODM: Support Android is on... | |
Z101020HD 800*1280 7 Inch LCD Screen with HDMI Controller Board 300 Nits Luminance | This 7-inch HDMI TFT LCD screen was created specifically for Raspberry Pi. All you need to do to get started is plug in two driver boards. Speci... | |
UART LCD Display | Full name of UART is Universal Asynchronous Receiver/Transmitter. RS232, RS422, RS485 are belong to UART. All of zhunyi technology LCD displa... | |
Resistive Touch Screen | Size: 1.8" to 10.1" Resolution: 240*320 to 1920*1200 Interface: SPI, RGB, MCU, MIPI, LVDS, EDP View Direction: IPS/12 o'clock Customization: Su... | |
Z20001 240*320 2 Inch LCD Display Module MCU/SPI Interface 25PIN | Size: 2 inch Resolution: 240*320 Interface: MCU-8/4-wire SPI Driver IC: ST7789V View Angle: IPS Brightness: 400 cd/m² Touch Panel: Suppo... |