SCRAP BUCKET
In steelmaking equipment, the scrap bucketis a device for loading scrap steel, used to inject scrap steel into the steelmaking furnace. The steel bucket mainly has two types: bottom opening feeding and mouth dumping feeding.
USES
SCRAP BUCKET USES
Scrap charging buckets are Constructed of heavy steel plate, bars and rolled shapes. They are used for electric arc furnace charging from top -which are designed for an even spread of scrap over the bed of the furnace. Bottom doors, fabricated of dished plate are waffled for added strength and allow the bucket to sit on the floor without special auxiliary supports. Cylinder body of rolled plate is welded inside and out. Main bails are of heavy duty construction or for long life - ease of operation. A spreader beam type auxiliary bail and guides, keep the door operating cables from wearing against the bucket.
FEATURES
SCRAP BUCKET FEATURES
The scrap bucket bottom usually is a clam shell design-i.e. the bucket opens up by retracting two segments on the bottom of the bucket.Some large-tonnage bottom-opening OEM furnace parts do not match the ferroalloy melting fumace incaliber, resulting in more material perpendicular to the opening direction and uneven fabric. Uneven fabric sometimes causes scrap to stick to the lining, affecting the life of the lining; sometimes it will cause the scrap to fall on the under-railrail, affecting the normal operation of the under-vehicle, increasing the workload of the operator.
VIDEO
SCRAP BUCKET VIDEO
Send product request
Other supplier products
LADLE FURNACE ROOFING | LF roofing is round-shaped and has a tube-type water-cooled structure. It is divided into a large furnace roof, a small ramming roof, an offgas exh... | |
SILICON METAL FURNACE | SILICON METAL FURNACE Industrial silicon (also called crystalline silicon, metal silicon) is one of the important materials in modern industrial p... | |
OXYGEN LANCE MANIPULATOR | The carbon-oxygen lance mainly refers to the EAF smelting, generally referring to the carbon-oxygen lance at the EAF furnace door, as well as the f... | |
SLAG POT | SLAG POT Both ferrous and non-ferrous metallurgical enterprises produce a large amount of high-temperature liquid slag, and the vast majority of s... | |
VOD VACUUM OXYGEN DECARBURIZATION | VOD VACUUM OXYGEN DECARBURIZATIONVD/VOD Furnace The equipment structure of a VOD furnaceis basically the same as that of a VD vacuum refining fu... |
Same products
SDS-05030 0.50mm Diameter 30mm Length Glued Steel Fiber | Seller: Tengzhou Star Smith Metal Products Co.,Ltd | This kind of steel fiber is made of high-speed wire, when you add it to concrete, which can impro... | |
SDS Micro Copper Coated Steel Fiber | Seller: Tengzhou Star Smith Metal Products Co.,Ltd | Micro brass fibers are made of copper coated steel wire , which is the most important materials o... | |
SDS Loose Hooked End Steel Fiber | Seller: Tengzhou Star Smith Metal Products Co.,Ltd | Hooked end steel fibres are made of high-quality cold drawn steel line, in order to make sure tha... | |
SDS Glued Hooked End Steel Fiber | Seller: Tengzhou Star Smith Metal Products Co.,Ltd | Glued hooked end steel fibre is made of high quality cold-drawn wire. The glued steel fiber in bu... | |
SDS Steel Fiber | Seller: Tengzhou Star Smith Metal Products Co.,Ltd | There are many types of steel fibre used in concrete. The steel fiber for concrete reinforcement ... |