TXJQ3 Electrical Isolation Switch
Scope of Application
TXJQ3 Electrical Isolation Switch is used for AC 50 / 60Hz, rated voltage 230-400V , 63A to 125A of rated current in the resistance and inductive hybrid circuit, mainly for on or off in the no load conditions to connect or isolate line and power. Especially it is used for isolating the power supply effectively to prevent accidental switch-on when people check circuit , in order to ensure operational safety of maintainer, electrical isolator switch is widely used in the matching products of national agricultural network meter box and replaces the old knife switch, the installation is more convenient , appearance is more beautiful.
Use environment and working conditions
◆ Ambient air temperature: -5 ℃ ~ +40 ℃, the average temperature does not exceed +35 ℃.
◆ Altitude: not more than 2000m.
◆ Relative temperature of atmosphere: +40℃ is not more than 50%, the wettest month is 90%.
◆ Pollution Degree: Grade Ⅱ.
◆ Use category: AC-22A.
◆ Installation conditions: hand-pull disconnector is normally installed vertically (top of the line), the handle pushed up, contact connected: play down the contact is disconnected, then the handle can be buckled to avoid accidental closing.
◆ Installation adopt TH35-7.5 type DIN rail.
Main technical parameters
Rated Current (A): 32, 63, 100
Pole: 1P, 2P, 3P, 4P
Rated working voltage: single-phase 230V, Three-phase 400V
Rated short-time withstand current: 12Ie, power-on time is 1s
Rated short-time making capacity: 20Ie, power-on time is 0.1s
Rated making and breaking capacity: 3Ie，1.05Ue，cosφ=0.65
operating performance: No-load 8500 times, On-load 1500times, In total 10000 times
Other supplier products
|
|
TXXH Current Limiter |
Scope of Application TXXH Current Limiter is applicable to AC 50Hz, operating voltage 220V, current 0.5-20A, power 110W-4.4kW. The current limiting... |
|
|
DZ47SD-63 Manual Transfer Switch |
Scope of Application DZ47SD-63 Manual Transfer Switch is a new circuit breaker with interlocking mechanism developed by our company, the solar tran... |
|
|
CJX2 Contactor |
Scope of Application CJX2 Contactor is mainly used for the circuit of AC 50Hz (or 60Hz), the voltage to 660V, the rated operating current to 95A in... |
|
|
BK Industrial Control Transformer |
Scope of Application BK Industrial Control Transformer is suitable for the AC circuit of 50Hz/60Hz, which is used as the control power, local light... |
|
|
TNID Residual Current Circuit Breaker |
Scope of ApplicationTNID-63 Residual Current Circuit Breaker is used for the circuit of AC 50Hz, rated voltage of 230V for 2 poles, 400V for 4 pole... |
All supplier products
Same products
