EST-FG2 Manual Force Measurement Test Stand
The test stand EST-FG2V/H is a electric motor test stand. It has a built-in DC motor, displacement measurement device, good load stability, wide application range; wide bench test speed, high accuracy; manual control, displacement cycle, and force value cycle functions. The manual test standcan be connected with a dynamometer to measure the force value and displacement, which is suitable for various industries such as push-pull load, plug-in force, fatigue test, and destruction test.
Features of EST-FG2 Manual Force Measurement Test Stand
Motorized driving.
Rugged construction
Capacity Up to 650 N (140 lbf,65kgf)
Multiple operation modes
Three-stage programmable cycle
Teaching & Playback programming
Force gauge data integration
USB connection to PC
Multiple limit protection functions
Specification of EST-FG2 Manual Force Measurement Test Stand
|
Capacity |
650N (65KG, 140lbf) |
|
Stroke |
220 mm |
|
Speed |
Adjustable Range: 30~720 mm/min Resolution:0.1 mm/min Accuracy: ±1 mm/min |
|
Displacement |
Resolution: 0.01 mm Accuracy: ± 0.2mm/min |
|
Operation Mode |
Manual, Cycle, Demo, Locating Mode |
|
Protection Functions |
Position Limit Force Limit (connected to force gauge) Locked rotor. Power Protection |
|
Cycle Program |
Three-stage cycle Displacement-based (D-cycle) Force-based(F-cycle) |
|
Outputs |
USB-B(connect to PC) RS232 outputs Set point output, RS232(connect with force gauge) |
|
Operating Environment |
0 to 40℃,20 to 80% RH |
|
Power Supply |
AC100~240V,1A |
|
Dimensions |
630 x 320 x 180 mm(EST-FG2V) 640 x 125 x 278 mm(EST-FG2H) |
|
Weight |
As one of the most reliable testing and measuring instruments companies, we provide digital height gauge, digital push pull force gauge, cap torque tester and etc. We also offer optimized solutions for special requirements.
Send product request
Other supplier products
 |
ETIPD Leeb Hardness Testing | Mikrometry Instrument Limited is a measuring instruments manufacturing companyand manufacturer ofdigital height gauge, force and torque measurement... |
 |
Coating Metal Thickness Gauge | Mikrometry Coating Thickness Detector will measure all coatings on metallic substrates using the magnetic induction or eddy-current principles, ens... |
 |
EFGH Advanced Force Indicator | The EFG20H professional digital advanced force gaugeindicator is designed to work with a wide range of Mikrometry remote force and torque sensors. ... |
 |
EST-FG1V Motorized Force Measurement Test Stand | The force gaugetest stand EST-FG1 is widely used in various industries or scientific research institutions for tension and compression load, insert... |
 |
EHS Shore Durometer | EHS1A/5D is a high-precision shore hardness meter. This EHS digital rubber hardness testeradopts high-precision displacement sensor and spring desi... |
Same products
 |
Portable Dew Point Meter RTM-2601 | Seller: Qingdao Realltech Instruments Co.,Ltd. | Portable Dew Point Meter RTM-2601 1.Introduction: RTM-2601 is a high accuracy of professional dew... |
 |
GF3000 STATIONARY MULTI STATIONS POWWER METER TEST BED | Seller: 782364 | The GF3000 series stationary three phase energy meter test bench is a fully automatic system that... |
 |
GF1000 MULTI-POSITIOS 1-PH ENERGY METER TEST BENCH | Seller: 782364 | The GF1000 series multi-positions single phase kWh meter test bench can measure mechanical meters... |
 |
GF112D 1-PHASE ELECTRICITY METER TESTER | Seller: 782364 | TheGF112D is a portable one-phase power meter tester. It used for testing the error of single-pha... |
 |
GF112B ONE-PHASE WATT-HOUR METER CALIBRATOR | Seller: 782364 | GF112B single phase electricity meter calibrator is suitable to test various types single phase e... |
