Apollo BK Three-chuck Tube Laser Cutting Machine 1000w-6000w

Remcor Apollo BK series three chuck tube lazer cuttingmachine can cut all types of metal tubes, from mild steel to stainless and also non-ferrous metals. It is also valid for cutting some reflective metals like aluminum, brass and copper, etc. The thickness of the metal can be anywhere up to 30 mm. The diameters can be up to Ø 350mm tubes. Can cut different shapes on the surface of square tubes, oval tubes, U tubes or rectangular tubes or other special shape tube products. The most outstanding feature of our BK system is that can realize the real Zero-tailing cutting. And our automatic loading system freedom operator from the hard and heavy pipe loading problem.

Apollo BK Three-chuck Tube Laser Cutting Machine 1000w-6000w Features

Different shapes & Different sizes

Max weight

600kgs load and unload maximum length up to 12M.

Raw material waste

Unique 3 chucks technology, zero tailing, high pipe utilization Average material can reduce up to 30%.

Labor cost

Real time, high precision, fast troubleshooting servo motor control automatic and semi load can be chosen.

Environment pollution

Dust collection box included full sealing chuck to prevent dust into chuck to have a longer lifetime.

Low efficiency

Apollo BK Three-chuck Tube Laser Cutting Machine 1000w-6000w Parameter Details

Item	6020-BK	7025-BK	9025-BK	9034-BK
Power range	1500-6000W
Chuck structure	3 chucks
Tube size	Round Type: Φ15-200mm	Round Type: Φ15-245mm	Round Type: Φ15-245mm	Round Type: Φ15-330mm
	Square Type:15-140mm	Square Type:15-175mm	Square Type:15-175mm	Square Type:15-230mm
Positioning accuracy of x& y	±0.05mm/m
Max positioning speed x&y	100m/min			80m/min
Max cutting length	6000mm	7000mm	9000mm	9000mm
Tail length	≥ 0mm
Max weight single tube	135KG	260KG	260KG	500KG
Max loading length	6000mm	7000mm	9000mm	9000mm

Fully Annealed Table

The bed body adapts the segmented rectangular tube welding bed with fully annealed treatment at over 600⁰. After tempering, the strength, rigidity and stability are guaranteed, the precision would be tested and debugged which can make sure the precision can be maintained for a long time. The table is equipped with automatic lubrication device, which ensure the moving parts operate in good condition and improve the service life of guide rails, gears and rack.

Follower Support

The follower support device will be optional. The follower support is mainly to assist in controlling the excessive deformation of cutting longer pipes (pipes with smaller diameter), and the servo motor drives the up and down movement of the pallet assembly. When the chuck moves to the corresponding position, the auxiliary support automatically drops for avoidance.

Smart Auto Focus Laser Head

Standard auto focus function, no need focus adjustment while changing sheet; Automatic tracking and accurately adjusting the focus according to the material thickness to ensure the best cutting effect of the whole board. Shorter perforation time, better perforation quality, high-speed cutting, saving time.

Intelligent CNC Operating System

tube laser cutting machine intelligent cnc operating system

It simplifies complex CNC machine operation and integrates CAD, Nest and CAM modules in one. From drawing, nesting to workpiece cutting all can be finished by a few clicks on big IPAD Screen. Realize the intelligent diagnosis, multi-threading operation, three-level perforation, laser energy control, adaptive edge-finding, automatic corner acceleration and deceleration, flight cutting, switching worktables, mechanical accuracy compensation etc.

Pneumatic Clamp Chucks

Pneumatic clamp design on both sides. The dual-chucks help reduce tube vibration to a minimum, guaranteeing high accuracy in even complex tube configurations at high cutting speed. Suitable for cutting a range of tube diameters from Ø20 mm to Ø220 mm and various wall thicknesses.

Front chuck

tube laser cutting machine front chuck

Back chuck

tube laser cutting machine back chuck

Fractional Automatic Support Technology

Applies the intelligent tube support design, which can solve the deformation problems in the process of long tube cutting.

Equipped with two sets of variable-diameter support structures, which are automatically lifted by the cylinder to avoid the rear chuck in processing. When processing profiles with different diameters, manually turn the variable-diameter wheels to achieve fit and support for different-sized profiles. The variable-diameter wheels It can be supported every two degrees of rotation to reduce the diameter of the circumscribed circular tube by 2mm

We can offer kinds of 3kw laserfor sale, and the 3kw fiber laser priceis reasonable, if you have needs to buy high quality 3000w laser cutting machine, please contact us.

If you are looking for a reliable metal laser cutter factory, please choose us, and we will be your best partner.

Other supplier products

	Professional Laser Welding Machine	As a laser welding machine company, Remcor offers the professional welding machines which is 3-5 times faster than traditional argon or tig mig wel...
	Apollo AK Two-chuck Tube Laser Cutting Machine 1000w-6000w	Remcor technology is a global supplier for the turnkey fiber laser cutting lines, which have around 18 years experiences, 5000 sets installations g...
	Mild Steel Laser Cutter	Carbon steel or mild steel is the mostly used metal in sheet fabrication. Commonly used structurally in buildings and bridges, axles, gears, shafts...
	Laser Cutting Materials	REMCOR laser cutter cut metalisdesigned to precisely cut a variety of material including steel, aluminum, brass, stainless steel, copper, and more....
	AC Type Vacuum Suction Lifter	The electric type of vacuum suction device can be applied in feeding and blanking of the glass, sheet metal, marble, etc. material. The maximu...

All supplier products

Same products

	MFS-160A 1-8KHZ 160KW 250A Medium Frequency Induction Heating Machine	Seller: Chengdu Jinkezhi Electronic Co., Ltd	MFS-160A medium frequency induction heating machine inverter uses IGBT as the core component. The...
	MFS-120A 1-8KHZ 120KW 182A Medium Frequency Induction Heating Machine	Seller: Chengdu Jinkezhi Electronic Co., Ltd	MFS 120A induction heating power supply adopts IGBT as the core component. As a medium frequency ...
	Medium Frequency Induction Heating Machine	Seller: Chengdu Jinkezhi Electronic Co., Ltd	If you need hot forging for large workpieces, smelting for ferrous or non-ferrous metals or deep ...
	High Frequency Induction Heating Machine	Seller: Chengdu Jinkezhi Electronic Co., Ltd	The working frequency of CX series ultra high frequency induction heating machinecovers 50KHZ ~ 1...
	CX2030C 50-120KHZ 30KVA 23A High Frequency Induction Heating Machine	Seller: Chengdu Jinkezhi Electronic Co., Ltd	CX2030C 50-120KHZ high-frequency MOSFET type induction heater holds the output power of 15KW/30KV...