Why two high is too high?
Since uniform back-side irradiance is key for bifacial gain, when you increase array width, two things can happen. Either you keep the array low to the ground and accept a reduction in back-side irradiance, or you raise the entire array high enough to mitigate rear-side mismatch losses.
Other supplier products
All supplier products
Same products
|
Bare Copper Wire for Electrical Purpose |
Seller: Ningbo Jintian Copper (Group) Co., Ltd., |
Electrical Bare Copper Wirefor Electrical Purpose
Copper's excellent electrical and thermal cond... |
|
Bare Copper Wire (8mm) |
Seller: Ningbo Jintian Copper (Group) Co., Ltd., |
Bare Copper Wire (8mm)
The electrical round copper wire products produced by our company are wid... |
|
Anti-dezincation Brass Rod |
Seller: Ningbo Jintian Copper (Group) Co., Ltd., |
Anti-dezincation Brass Rod
The anti-dezincification copper rods produced by our company can be... |
|
Anti-Corona Magnet Wire |
Seller: Ningbo Jintian Copper (Group) Co., Ltd., |
Anti-Corona Soldering Magnet Wire
The anti-coronaenameled copper wirefor frequency conversion mo... |
|
Annealed Copper Wire (2.6mm) |
Seller: Ningbo Jintian Copper (Group) Co., Ltd., |
Annealed Copper Cable(2.6mm)
The annealed bare copper wireproduced by our company are widely use... |