Automotive PCB
Automotive electronic products have different reliability requirements for PCBs in different parts,Huihe Circuit passed the IATF16949 automotive quality management system standard,Strictly follow the requirements of the control plan to produce, monitor, record and analyze,Ensure the stability of process parameters and the traceability of the production process.
Classification Of Automotive Circuit Board
Car Body Electronic Control System
Engine control system
Ignition control system
Fuel control system
Air supply system
Body control system
Power management system
Safety management system
Lighting system
Display monitoring system
Chassis control system
ABS control system
Electronic stability system
Pressure monitoring system
Steering control system
On-Board Electronic Control System
Car TV
Driving recorder
Parking sensor system
Car navigation system
Vehicle camera system
Huihe Circuits knows that the reliability of automotive electronics is equivalent to the reliability of automobiles, so it is necessary to ensure that the reliability of automotive electronics meets the requirements of service life and environmental tolerance. The PCB used in the automotive electronic system needs to withstand the test of various environmental changes, such as temperature and humidity, climate, acid mist, vibration, electromagnetic interference, current impact, etc.; in order to ensure the normal life cycle, the PCB needs to meet high reliability, high integration, high The characteristics and requirements of heat dissipation, high current (thick copper), light weight and miniaturization, and embedded devices. For example, the high-voltage control system of a new energy electric vehicle uses a strong current board to integrate the original scattered high-voltage device parts, scattered DC/charge/discharge/MCU and other functional parts on a PCB. The density has increased several times, but The structural space should be saved by 30%, and the manual assembly efficiency should be increased by 50%.
Under this development trend, Huihe Circuits has taken the following measures to ensure the high reliability of PCBs for automotive electronics: Pass IATF16949 automotive quality management system standards; automotive electronic products have different reliability requirements for PCBs in different parts, and fully understand these requirements and Select appropriate materials and production processes, reliability testing and testing according to characteristics; formulate material selection rules; select appropriate materials according to the use parts of automotive electronic products during engineering planning; strictly follow the requirements of the control plan for production, monitoring and recording ; Key processes and key characteristics are monitored and analyzed by SPC; to ensure the stability of process parameters and the traceability of the production process; based on the IPC-TM-650 standard, a set of systematic and strict product performance testing methods and evaluations have been established Mechanism, including thermal cycle test, high temperature thermal shock, salt spray test, high current shock, high voltage resistance, electromigration, etc.
Huihe Circuits is a professional custom pcb maker, we provide 5g circuit board, automotive printed circuit board, rc remote control circuit board, circuit board of remote control car, remote control car pcb, rc remote control board, rc car pcb board, rc car pcband etc. Want to know more? Please contact us.
在线联系供应商
Other supplier products
 |
Industrial Control PCB | With the continuous development of the “pcb automationequipment + industrial robot operation” mode,The requirements for electronic and ... |
 |
Blind Buried Vias & Hdi Pcb | Buried vias PCB & blind vias PCB, use micro blind vias to increase the trace distribution density. Improve radio frequency, electromagnetic wav... |
 |
8 Layer ENIG Impedance Control PCB | Number of layers: 8 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 4/3mil Inner layer W/S: 4/3mil Thickness: 1.2mm Special process:... |
 |
Layer Blind Buried Via PCB | Number of layers: 14 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 4/5mil Inner layer W/S: 4/3.5mil Thickness: 1.6mm Special process: Bl... |
 |
Heavy Copper PCB | Thick copper pcband heavy copper pcb, pcb fabrication up to 12oz, large current, pcb fabrication base material is FR4/Teflon/Ceramic, pcb fabricati... |
Same products
 |
一水葡萄糖 | 卖方: 郑州合化学科技公司 | 一水葡萄糖是一种葡萄糖的结晶形式，通常呈白色结晶粉末或颗粒状。 主要特点： 结晶性：一水葡萄糖以结晶形式存在，具有良好的溶解性和稳定性。 可溶性：在水中易于溶解，形成透明的溶液。 甜... |
 |
黄原胶 200目 | 卖方: 郑州合化学科技公司 | 黄原胶是一种高分子化合物，通常呈白色至微黄色粉末状。它是由葡萄糖和异黄酮糖单体聚合而成的天然胶，也可通过发酵生产。 主要特点： 凝胶性强：黄原胶能够在水中形成稳定的凝胶，具有良好的增稠性... |
 |
4-MMC 4mmc Hot Selling for sale a | 卖方: 833484 | 4-MMC 4mmc Hot Selling for sale a Dear friend Please don't worry about customs issues if you are... |
 |
4-MMC 4mmc Overseas warehouse High qualit a | 卖方: 833483 | 4-MMC 4mmc Overseas warehouse HiDear friend Please don't worry about customs issues if you are i... |
 |
4-MMC 4mmc Supply Raw Material Lower price a | 卖方: 833486 | 4-MMC 4mmc Supply Raw Material LoDear friend Please don't worry about customs issues if you are ... |
