.

G1 Solar Cell

G1 solar cell sizeplays an important role in the first unified standard size of monocrystalline percin the module. G1 solar cell size is 158.75mm, which has the advantages of lower production costs, higher power, and higher acceptance of the cell side on the premise of specsquare monocrystalline silicone sheet with thickness and diagonal line.

Sunrise Energy selected global high-quality G1 cells, equipped with non-destructive scratches, 9BB half cell, precision encapsulation, and other technologies, which can achieve the power of 415W.

High Precision , High Flatness Screen Printing

Solar Cells with high welding ability, optimized template design, zero defect appearance

Advanced PECVD Film

MBB solar cell with silicon nitride anti-reflective coating. Uniform navy blue

Perfect Texturing

MBB solar cellwith monocrystal pyramid pattem surface and polycrystalline silicon volute pattern surface High nucleation density, large receiving area, low reflectivity

Sophisticated Warranty

MBB solar cell with parallel resistance test to reduce hot spot effect and test weak light response Precise and efficient selection of chips, sorted into 12 levels according to the power of a single chip, Accuracy up to + 0.1% Appearance sorting to ensure that all cells in the assembly are similar in color

G1 solar cell size is 158.75-158.75mm. The dicing process in perc modulesproduction is divided into full and half. There are 5BB and 9BB. The appearance of Sunrise selection is zero defects. G1 solar cell size mono cell with higher welding ability, considering cell efficiency, production yield, and market analysis, it is confirmed that 9BB is the best solution. Innovative bifacial mono perctechnology and 9BB design shorten the current transmission distance and reduce the resistance loss. So that the conversion efficiency of the MBB solar cell can be improved, and the impact on the performance of the module is reduced.

9BB P-type perc bifacialcan contribute up to 30% of the gain in the module power generation process. The half-cut cell technology has higher conversion efficiency than the full cell and has a lower rated operating temperature. Compared to the full cell module, the half cell module temperature is 2-3 degrees lower, and the hot spot temperature is 10-20 degrees lower. At the same time, MBB solar cell has a lower shadow mask loss.

It has better IAM performance than conventional flat ribbons when light is incident. The 9BB with a smaller ribbon design can reduce the impact of stress. Make the module resistant to high and low-temperature performance and mechanical load performance.

Applications of the G1 Solar Cells

G1 cell is mainly used in 120, 132, 144 cell solar modules. It is representative of small size modules. The G1 module is encapsulated by Sunrise G1 solar cell with power up to 415w, and also provide full black, double glass and bifacial, half cell and other customization.

As one of solar energy product manufacturers, we have types of crystalline solar cellsfor sale, anything you need, please leave us a message.



在线联系供应商

至: Sunrise Energy Co., Ltd
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Off Grid Industrial Solar Panels
Off Grid Industrial Solar Panels The commercial off grid solar systembased on module design is also more widely used. It consists of solar modules, controllers, inverters, battery ...
ON GRID SOLAR PANEL
ON GRID SOLAR PANEL What Is a Grid Connected PVSystem? The generated electricity will be fed into the grid, and the grid is used as an energy storage device. When t...
G12 Solar Cell
G12 Solar Cell G12 large size silicon chip can improve the production efficiency from silicon chip to battery chip to module. At the same time, the production and...
MONOCRY STALLINE SOLAR CELLS
MONOCRY STALLINE SOLAR CELLS single crystalline solar cell monocrystalline solar cell efficiency difference between perc monocrystallineand polycrystalline solar cells Usi...
SOLOR ENERGY PRODUCTS
SOLOR ENERGY PRODUCTS The solar products chinacurrently operated by Sunrise mainly include the development, production installation, and sales of solar modules, as well ...
供应产品

Same products

一水葡萄糖
一水葡萄糖 卖方: 郑州合化学科技公司 一水葡萄糖是一种葡萄糖的结晶形式,通常呈白色结晶粉末或颗粒状。 主要特点: 结晶性:一水葡萄糖以结晶形式存在,具有良好的溶解性和稳定性。 可溶性:在水中易于溶解,形成透明的溶液。 甜...
黄原胶 200目
黄原胶 200目 卖方: 郑州合化学科技公司 黄原胶是一种高分子化合物,通常呈白色至微黄色粉末状。它是由葡萄糖和异黄酮糖单体聚合而成的天然胶,也可通过发酵生产。 主要特点: 凝胶性强:黄原胶能够在水中形成稳定的凝胶,具有良好的增稠性...
 4-MMC 4mmc	Hot Selling	for sale	a
4-MMC 4mmc Hot Selling for sale a 卖方: 833484 4-MMC 4mmc Hot Selling for sale a Dear friend Please don't worry about customs issues if you are...
 4-MMC 4mmc	Overseas warehouse	High qualit	a
4-MMC 4mmc Overseas warehouse High qualit a 卖方: 833483 4-MMC 4mmc Overseas warehouse HiDear friend Please don't worry about customs issues if you are i...
 4-MMC 4mmc	Supply Raw Material	Lower price	a
4-MMC 4mmc Supply Raw Material Lower price a 卖方: 833486 4-MMC 4mmc Supply Raw Material LoDear friend Please don't worry about customs issues if you are ...