Hard Rock PDC cone bit Used for drill underground core
Overview of PDC Core Bit
GREAT customized made Diamond core bits, which including Matrix body and Steel body, the Diamond core bit is used to drill an underground core (or mineral core) primarily when samples of underground rock (minerals) are required.
Every PDC Core bit is optimized hydraulically for each cutting structure and formation application.
Each design is based on a balanced and fully covered cutting structure.
Sometimes we need to analyze the rock, so the best choice asking GREAT salesman to get your right recommendation.
The Specification of PDC Core Bit
|
Bit Size and Type |
8 1/2"GMC3232 |
Nozzle Qty |
12P |
|
Cutter Size (mm) |
Φ13mm ×30 |
Gauge Lenghth |
|
|
Blade |
12 |
Connection |
Chuan 7-4 |
|
Operating Parameters |
|||
|
Rotary Speed(rpm) |
40~150 |
Weight on Bit(KN) |
40~80 |
|
90 |
Flow Rate(lps) |
10~30 |
|
The Advantage of PDC Core Bit
The PDC Core bithas design a shallow parabolic profile and medium cutter density, designed for coring the medium hard formation. Nozzles options according to the hydraulic request, it is installing the size of the mainly PDC cutter is 1308mm, and the most popular blade is 6 blade, 7 blade, 8 blade, enhance the bit's ability to drill in hard formations. Special TSP gauge or PDC Arc-cutters to protection the diameter.
The superior patented tool testing method provides the best PDC cutter for any challenge.
Soft to medium-hard formation with low compressive strength interbedded with hard layers.
Rock type: Mudstone, limestone, anhydrite.
We produce bits of rock,button bit drilling,rock core drill bits,rock hammer drill bits,rotary hammer drill bits for rockand Great Drill Bits,RFQ today.
在线联系供应商
Other supplier products
 |
PDC cutters used for PDC bit, PDC hole opener, PDC reamer | Overview of PDC Cutter PDC cuttersare made of diamond micro-powder and cemented carbide substrate sintered under ultra-high pressure and high te... |
 |
Professional manufacturer to Rock Reamers | Overview of Rock Reamer Hole Opener The Rock reamer produced by GREAT company is used to expand the diameter of the pilot hole and is mainly used ... |
 |
Reverse circulation PDC bit for geological exploration samples | Overview RC PDC Bit RC PDC bit from GREAT are manufactured from AISI 4145H heat-treated steel, Reverse circulation drill bits are widely used in g... |
 |
Core barrel with high performance rock roller bit for Pile Foundation | Overview of Core Barrel Roller Bit The roller bit core barreluses high carbon steel and a special bit Angle to maintain drilling strength and effi... |
 |
Bi-center Bit | Overview ofbi center bit This type of bi center drill bitmainly used for medium to medium-hard compressive and abrasive formation, it has medium a... |
Same products
 |
MFS-160A 1-8KHZ 160KW 250A Medium Frequency Induction Heating Machine | 卖方: Chengdu Jinkezhi Electronic Co., Ltd | MFS-160A medium frequency induction heating machine inverter uses IGBT as the core component. The... |
 |
MFS-120A 1-8KHZ 120KW 182A Medium Frequency Induction Heating Machine | 卖方: Chengdu Jinkezhi Electronic Co., Ltd | MFS 120A induction heating power supply adopts IGBT as the core component. As a medium frequency ... |
 |
Medium Frequency Induction Heating Machine | 卖方: Chengdu Jinkezhi Electronic Co., Ltd | If you need hot forging for large workpieces, smelting for ferrous or non-ferrous metals or deep ... |
 |
High Frequency Induction Heating Machine | 卖方: Chengdu Jinkezhi Electronic Co., Ltd | The working frequency of CX series ultra high frequency induction heating machinecovers 50KHZ ~ 1... |
 |
CX2030C 50-120KHZ 30KVA 23A High Frequency Induction Heating Machine | 卖方: Chengdu Jinkezhi Electronic Co., Ltd | CX2030C 50-120KHZ high-frequency MOSFET type induction heater holds the output power of 15KW/30KV... |
