Automatic 2 Part Ab Silicone Sealant Mixing Dispenser for LED Lamps
ab glue mixing and dosing machine
Potting and encapsulation is the process of embedding products & assemblies in a liquid resin (potting compounds) to protect them against rough environment conditions. Potting can be performed in atmosphere pressure or even under vacuum, if high voltage insulation and high temperature differences are needed. Encapsulation of parts will stop corrosion of metals and reduce damage caused by vibration and mechanical stress.
We offer automatic ,se-mi automatic fluid dispensing potting machine and the related production line and vacuuming systems .
General description of the machine
our ab dosing dispensing machine precisely metering, mixing and dispensing two-component medium to low-viscosity materials for potting, dispensing ,sealing, casting ,encapsulation and filling.
For variable ratio dispensing, the system handles ratios from 1:1 to 10:1.
The system is composed of AB tanks, metering pumps and motor, mixing pipe, dual valve, dynamic motor for dynamic stirring and 3-axis robotic platform.
Two kinds of component materials are separately before they mix in mixing tube to avoid glue cure in system. Dispensing valve is with suck-back function to keep thin fluid from dripping.
Introduction :
1. Working Mode: controlled by PLC module and MCGS touch screen.
2.High precision valve: high speed, glue off clean, no glue drawing, no dropping.
Working principle :
Compound materials A & B are kept in two tanks separately. There are two sets of metering pumps inside the machine for metering A and B resin by setting ratio, draining out material individually from tank A & B. Liquid A & B mix with each other in the mixer pipe and dispensed out according to the programmable data.
1. Stainless panel vacuum pressure tank which can bear negative pressure of inner tank .
6 Tank with heater which can preheat materials to assure good flowability .
our Pump technology
Valve technology
1. Dynamic mixing with stirring detecting function that ensure glue mixing evenly .
2 Stainless design of the glue touch surface to capture more higher material compatibility .
3 Glue valve with flow-back prevent function that can prevent glue from dropping when stop gluing .
4 Sealing parts of rod shaft adopt imported parts to keep more higher durability .
5 The self-cleaning function make machine cleaning more easier that you needn't dis-assembly the parts to wash . Cleaning time and cleaning times could be set in the touch screen.
detecting function that detect the speed and running time of pumps to ensure the ratio reliability.
3 Adjustable gluing-out volume make sure glue A/B dispense out at the same time from glue valve to get better glue mixing effect .
4 Machine with gel resistance calculator , which prevent the mixture curing inside .
5 You can set single gluing-out and steady gluing-out function to meet up with your different process requirement .
6 Whole machine system and function is controlled by Panasonic PLC and MGCS touch screen .
7 Reserved PLC communication interface, which easy connecting with outside device .
8 Equipped with a safety lock to prevent staff from wrong operation ..
在线联系供应商
Other supplier products
Automatic Glue Spraying Machine for MGO Panels Fire-Proof Door Refrigerated Truck Body Panels | Automatic Glue Spraying Machine for MGO Panels Fire-Proof Door Refrigerated Truck Body Panels The glue Spraying line is based on the reform of t... | |
2-Part Epoxy Dispensing: Fluid Dispenser vs. Meter Mix System | Information about Meter Mixing/Dispensing Machines for 2-Part Polyurethane Casting Resins Two-part polyurethane casting resin systems may be proce... | |
2 Part Bi-Component Ab Part Silicone Epoxy Polyurethane Glue Potting Machine | ab glue mixing and dosing machinePotting and encapsulation is the process of embedding products & assemblies in a liquid resin (potting compoun... | |
Introduction to Honeycomb Board Gluing Machine | Introduction to Honeycomb Board Gluing Machine In the realm of industrial manufacturing, the Honeycomb Board Gluing Machine stands out as a crucia... | |
Fully Automatic Glue Spraying Machine for Rock Wool Sandwich Panel MGO Panels Fire-Proof Door | Fully Automatic Glue Spraying Machine for Rock Wool Sandwich Panel MGO Panels Fire-Proof Door The glue Spraying line is based on the reform of t... |
Same products
MFS-160A 1-8KHZ 160KW 250A Medium Frequency Induction Heating Machine | 卖方: Chengdu Jinkezhi Electronic Co., Ltd | MFS-160A medium frequency induction heating machine inverter uses IGBT as the core component. The... | |
MFS-120A 1-8KHZ 120KW 182A Medium Frequency Induction Heating Machine | 卖方: Chengdu Jinkezhi Electronic Co., Ltd | MFS 120A induction heating power supply adopts IGBT as the core component. As a medium frequency ... | |
Medium Frequency Induction Heating Machine | 卖方: Chengdu Jinkezhi Electronic Co., Ltd | If you need hot forging for large workpieces, smelting for ferrous or non-ferrous metals or deep ... | |
High Frequency Induction Heating Machine | 卖方: Chengdu Jinkezhi Electronic Co., Ltd | The working frequency of CX series ultra high frequency induction heating machinecovers 50KHZ ~ 1... | |
CX2030C 50-120KHZ 30KVA 23A High Frequency Induction Heating Machine | 卖方: Chengdu Jinkezhi Electronic Co., Ltd | CX2030C 50-120KHZ high-frequency MOSFET type induction heater holds the output power of 15KW/30KV... |