.

AV13*1075, AV13*1350LI Tooth Cogged V Belt for Automobile

1, high transmission accuracy. As mentioned earlier, the belt drive cannot guarantee the accurate transmission ratio, and the chain drive can not achieve a constant instantaneous transmission ratio, but the transmission ratio of the involute gear commonly used in modern times is theoretically accurate and constant. This is not only a key requirement for precision machinery and instruments, but also an important condition for reducing dynamic load and achieving smooth transmission under high speed and heavy load. 2, wide range of application. The power range of gear transmission is extremely wide, and belt transmission and chain transmission are difficult to compare.

PRODUCT INTRODUCTION
The Top and bottom are encased by the wrapper ,Both sides are rubber v belt of tooth shape groove is designed for the bottom to improve the flexural property
PRODUCT FEATURES
●Large intensity ,High Fiexibility ,Good Durability
●Special bottom rubber used ,small elongation and long service life
●Excellent heat -resistance ,Oil -propt and wearing resistance
●High transmission efficiency
●suitable for band pulley with minor diameter a
●safe performance can be guaranteed even during high -speed operation


在线联系供应商

至: 河北勃硕汽车科技有限公司
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

工厂热销 V 带聚橡胶 V 带
工厂热销 V 带聚橡胶 V 带 我们是世界顶级的三角带供应商。 主要产品有多楔带、汽车同步带、工业同步带、三角带、齿形带等。拼接机产品生产一般只用一层原胶,但我们的产品是用4层原胶拼接在一起的,生产出来的产品寿命更长,更耐磨磨床产品初成型后,为保证三角带厚度均匀,将三角带不平整部分打磨掉 我们的优势-- 我们是工厂,所以价格...
液压缸公制单唇PU材质U杯密封圈
液压缸公制单唇PU材质U杯密封圈 PU油封,UHP/UNP油封,PU液压油封,PU橡胶油封,PU油封,UHP/UNP油压油封,油封 PU密封件(液压密封件):1.可用材质:PU;2、硬度:肖氏A 90;3、认证:ISO9001:2008;4、工作温度:-40~+80℃;5、工作压力:≤320bar;6、来回速度:≤...
3pk-25pk Factory Direct EPDM Engine V Belt for Truck
3pk-25pk Factory Direct EPDM Engine V Belt for Truck PK belt is mainly used for the transmission of engines, motors and other power equipment, which is especially widely used in the auto parts market ...
O 形圈 419 件公制橡胶分类套件 O 形圈盒
O 形圈 419 件公制橡胶分类套件 O 形圈盒 油封特点:我们的套件包括 18 种最常用的 O 型圈尺寸丁腈环耐热、大多数石油和硅油、液压和非芳香燃料以及溶剂最常用的标准 SAE 尺寸存储盒按尺寸排列 O 型圈 描述:这套 225 件的 O 型圈套装非常适合汽车、商业和液压用途。 我们的套装包含 18 种最常用的尺寸,可适应各种任务。 这些...
汽车用耐热橡胶汽车正时皮带
汽车用耐热橡胶汽车正时皮带 我们的优势-- 我们是工厂,所以价格便宜-- 样品免费-- 生产采用新技术,寿命更长-- 我们将在1小时内回复您的询问-- 我们可以提供当地市场最畅销的尺寸和型号--型号齐全,交货快捷 产品结构 -- 低噪音运行 --无需润滑剂 --防止滑倒 -- 节省燃料 --良好的经济 --极高的机械效率...
供应产品

Same products

Nissan Maxima 2009-2013 Control Arm
Nissan Maxima 2009-2013 Control Arm 卖方: WENZHOU SAFE AUTO PARTS Co.,Ltd This product is suitable for NISSAN MAXIMA 2009-2013 CONTROL ARM, with one ball joint and two bus...
Nissan Maxima 1996-1999 Control Arm
Nissan Maxima 1996-1999 Control Arm 卖方: WENZHOU SAFE AUTO PARTS Co.,Ltd This product is suitable for NISSAN MAXIMA 1996-1999 CONTROL ARM, with one ball joint and two bus...
Nissan Kicks 2018-2021 Control Arm
Nissan Kicks 2018-2021 Control Arm 卖方: WENZHOU SAFE AUTO PARTS Co.,Ltd This product is suitable for NISSAN KICKS 2018-2021 CONTROL ARM, with one ball joint and two bush...
Nissan Juke 2010-2022 Control Arm
Nissan Juke 2010-2022 Control Arm 卖方: WENZHOU SAFE AUTO PARTS Co.,Ltd This product is suitable for NISSAN JUKE 2010-2022 CONTROL ARM, with one ball joint with two bush...
Nissan Control Arm
Nissan Control Arm 卖方: WENZHOU SAFE AUTO PARTS Co.,Ltd NISSAN sells well worldwide, and our firm has produced several control arms for NISSAN vehicles, ...