24KV Recloser Vacuum Circuit Breaker
The 24KV breaker switch unit is comprised of three poles, the operating mechanism, and the operating mechanism housing. The sequence of the poles is A -B – C or 1 – 2 - 3 (sequence left to right when viewed from the lower terminal side of the recloser switch unit.
Each 24kv vacuum circuit breakerby GOPOWERis embedded in a solid-insulated pole made of weather-proof cyclo aliphatic epoxy resin. This enables a small design as well as resistance against environmental effects.
Breaker principle and design of 24KV Vacuum Circuit Breaker
ZW32 series 24KV circuit automatic recloserare used in distribution systems. 24kv vacuum circuit breakes are used to make and break normal and fault currents. Breakers are fully equipped with sensors and a controller to provide a means of protection and control. For more pole top switches at bulk price.
In case of a line fault, breakers can break and make currents several times, thus avoiding longer network interruptions due to temporary faults. The manufacture, design, and testing of the vacuum recloser is based on current standards IEC 62271-111:2019
Technical Parameters of 24KV Vacuum Circuit Breaker
Products Type |
ZW32-24 |
Maximum System Voltage |
24kV |
Rated Continuous Current |
630A |
Rated Frequency |
50/60Hz |
Short Time Withstand Current |
20kA/1sec |
Mainly Active Load Current |
630A |
Number of Load-break Operations |
30 |
Short-circuit Making Current (peak) |
50kA |
Number of Making Operations |
5 times |
Cable Charging Current |
25A |
Line Charging Current |
|
Closed Loop Circuit Current |
630A |
Transformer Magnetizing Current |
22A |
Wet Condition-10sec Ph- Ph-Eth, Across Interrupters |
50kV |
DryCondition-1min,Ph- Ph, Phase to Earth |
65kV |
Dry Condition - 1 min AcrossInterrupter |
79kV |
Phase to Phase, Phase to Earth |
125kV |
Across Interrupter |
145kV |
Internal Arc Test |
20kA /0.1 sec |
Arc Extinction Medium |
vacuum |
Insulation Medium |
vacuum |
Creepage Distance (Silicon) |
960mm |
Dry arcing distance |
200mm≥ |
IP Level |
67 |
Closing/Opening Time |
<1sec |
Mechanical Operations (Guaranteed) |
10000times |
Operating Temperature (*Manual Type) |
-25~+70℃ |
在线联系供应商
Other supplier products
LBS 24KV 630a SF6 Gas Load Break Switch | 24kV SF6 load break switch is a sf6 load break switch for medium voltage switchgear, using SF6 gas as arc extinguishing and insulating medium. Rate... | |
SF6 Gas Load Break Switch 11kv | The 11 kv load break switch is suitable for the distribution network with the highest voltage 11kV, the rated current 630A, and the rated frequency... | |
33KV SF6 Gas Load Break Switch | Application of 33KV SF6 Gas Load Breaker Switch The switch is made of a proven rugged, corrosion-resistant material (304L stainless steel plate fo... | |
Recloser Control Box-Feeder Terminal Unit | Recloser Control Box-Feeder Terminal Unit The feeder terminalunit(FTU) is a new HV switch control device of control cabinet enclosures equipped wi... | |
Control Box-Feeder Terminal Unit | Control Box-Feeder Terminal Unit The feeder terminal unit(FTU) is a new HV switch control device of control cabinet enclosures equipped with both ... |
Same products
Used Electric Motor Scrap for Sale, ELMO Supplier, ferrous metal DC , AC, HP motors | 卖方: Ivory Garia Scrap plastic supplier | 如果您从事工业或汽车行业,您可能会有一些二手电动机废料。电动机是各种机械、车辆和电器中不可或缺的部件。然而,在电动机的生命周期结束时处理这些电动机可能具有挑战性。幸运的是,回收和重新利用二手电动... | |
工业 EtherCAT 网关实时监控以太网 Modbus 至 EtherCAT 转换器 | 卖方: 深圳市钡铼技术有限公司 | BL123协议转换器是一款具有以太网口和RS-232/485串口的工业协议网关,BL123协议转换器用于将Modbus RTU、Modbus TCP转换为EtherCAT通信。 | |
工业自动化 Modbus 至 Profinet 转换器,适用于西门子 PLC Profinet 网关 | 卖方: 深圳市钡铼技术有限公司 | BL122协议转换器是一款具有以太网口和RS-232/485串口的工业以太网网关,BL122协议转换器用于将Modbus RTU、Modbus TCP转换为PROFINET通信。 | |
光伏能源IEC104以太网IO模块 | 卖方: 深圳市钡铼技术有限公司 | BE190 IEC104 以太网 IO 提供 26 种 IO 板选项,包括数字量输入/输出、模拟量输入/输出、热电偶和电阻温度检测等,可组合成 10,000 多种型号,满足各种应用场景,并且可以... | |
楼宇自动化 BACnet/IP BMS 以太网 IO 模块 | 卖方: 深圳市钡铼技术有限公司 | BA190 BACnet 以太网 IO 提供 26 种 IO 板选项,包括数字输入/输出、模拟输入/输出、热电偶和电阻温度检测等,可组合成 10,000 多种型号以满足各种应用场景,并且您可以根... |