Tungsten Rod
HSG METAL is a professional tungsten rod manufacturer and tungsten rod factoryin China. Pure tungsten rod is made of 99.95% tungsten powder. Its physical properties are as follows: density 19.3g/cm3, melting point (liquid) 3422°C, conductivity 30% IACS Min, hardness 69HRA Min. The forging and annealing process results can be obtained by test. It possesses special properties such as low thermal expansion with good thermal conductivity, adequate resistance to electrical resistance, and high elastic modulus. The products made from tungsten are widely used in various fields, such as support line, lead line, printer needle, all kinds of electrodes and quartz furnace, filament, high-speed tools, auto products, sputtering target material, heating device with special properties. It is generally made by powder metallurgy.
HSG Metal is an experienced tungsten rod manufacturerin China. If you are looking for a reliable tungsten rod factory, contact us today for the latest tungsten rod price!
Application of Tungsten Rod
Tungsten rods possess special properties, such as low thermal expansion with good thermal conductivity, adequate resistance to electrical resistance, and high elastic modulus. Therefore, tungsten rods are widely used in various fields. Such as support line, lead line, printer needle, various electrodes and quartz furnace, filament, high speed tools, automotive automatic products, sputter target material.
As a professional tungsten rod manufacturer in China, HSG Metal specializes in the production of high-quality tungsten rods. We have been providing top-tier tungsten rods to our customers from all over the world. If you are looking for a tungsten rod factory, contact us now!
Application of Tungsten Rod
Production Process of Tungsten Rod
Different average forging ratios and forging methods were used to draw the sintered pure tungsten bar, and the annealed tungsten bar was annealed under different annealing systems. The microstructure and physical and mechanical properties of the samples were analyzed by metallographic microscope, hardness tester and density tester. The results showed that:
- ℃, the average forging ratio should be less than 32%.
When the total forging ratio is about 80%, the recrystallization of the tungsten rod forged at one end of one fire is basically completed after annealing at 1300℃ for 30 min, while the recrystallization of the tungsten rod forged at both ends of one fire is completed after annealing at 1350℃ for 60 min when the average forging ratio is larger. After annealing, the hardness of tungsten bars with the two forging processes will decrease, and the hardness of tungsten bars with the former process is less than that with the latter process before annealing and at the early stage of annealing, and this difference is no longer obvious with the completion of recovery recrystallization.
Features of Tungsten Rod
The surface of sintered tungsten rod is silver-gray metallic luster;
The surface of the forging tungsten rod has a layer of oxide, the surface is black;
Polished tungsten rod, silver gray metallic luster.
在线联系供应商
Other supplier products
 |
Tantalum Powder | Tantalum in powder form, dark gray or silver gray, is an important raw material for the preparation of capacitors and tantalum materials. Classi... |
 |
Tungsten Metal Bar | Pure tungsten baris made of 99.95% tungsten powder. Its physical properties are as follows: density 19.3g/cm3, melting point (liquid) 3422°C, c... |
 |
Refractory Metals | As one of the reliable refractory metal suppliers, Huasheng Metal are keeping a large and comprehensive inventory of the highest quality in form of... |
 |
Refractory Metals | As one of the reliable refractory metal suppliers, Huasheng Metal are keeping a large and comprehensive inventory of the highest quality in form of... |
 |
Tantalum Rod | Tantalum rod has two kinds of purity, 99.95% and 99.99%. The material is tantalum tungsten alloy rod, the brand is Ta1, Ta2. Specification of Tant... |
Same products
 |
Torsion Spring Clip | 卖方: ningbo atlas metal hardware co ltd | Torsion Spring Clip We manufacture close tolerance parts with complex geometries, intricate deta... |
 |
Torsion Spring | 卖方: ningbo atlas metal hardware co ltd | Torsion Spring A torsion springis a spring that works by twisting its end along its axis; that i... |
 |
Threaded Parts | 卖方: ningbo atlas metal hardware co ltd | Threaded Parts We have rich experience in machining stainless steel, Titanium alloy, aluminium, ... |
 |
Tension Spring | 卖方: ningbo atlas metal hardware co ltd | Adjustable Tension Spring Tension springs are wound helical coils that are wrapped tightly toget... |
 |
Stepped Steel Shaft | 卖方: ningbo atlas metal hardware co ltd | Stepped Steel Shaft Approved by ISO9001, we introduce advanced equipments from Germany and Japan... |
