COPPER CLADDED ELECTRODE ARM
The conductive electrode armis a new type of cross arm made of copper steel composite plate or aluminum steel composite plate, with a rectangular cross-section shape and internal water cooling. The electrode arm eliminates many insulation links between the water-cooled conductive copper tube, 2 electrode voltage clamp, and cross arm, greatly simplifying the cross arm structure in ultra-high power electric arc furnaces.
REQUIREMENT
REQUIREMENTS FOR CONDUCTIVE CROSS ELECTRODE ARM
Light weight, good stiffness, low impedance, and long service life.
One end of the conductive cross arm is supported on a column, and the other end is used to clamp the electrode, which has a lifting function. The lightweight of the conductive cross arm means that the driving power required for the electrode column to perform lifting and adjustment movements is relatively reduced, and so on.
STRENGTH
CHNBZTECH COPPER CLADDED ELECTRODE ARM STRENGTH
The hollow section and double-layer copper steel composite plate are adopted to greatly reduce the Skin effect, reduce the impedance and improve the electric heating efficiency;
As parts of electric furnace, the hollow cross-section box structure and internal water-cooled channel greatly enhance the strength of the cross arm, which is conducive to adjusting electrode movement without causing vibration and is conducive to arc stability;
The weight is lighter than traditional steel tube type cross arms, with small inertia, which is conducive to frequent electrode lifting and adjustment.
在线联系供应商
Other supplier products
 |
OXYGEN LANCE MANIPULATOR | The carbon oxygen lance mainly refers to the EAF smelting, generally referring to the carbon oxygen lance at the EAF furnace door, as well as the f... |
 |
EAF ROOF | In the past, the EAF (electric arc furnace) roof mostly used plate type fully water-cooled furnace covers, masonry furnace covers, or plate type se... |
 |
SCRAP BUCKET | In steelmaking equipment, the scrap bucketis a device for loading scrap steel, used to inject scrap steel into the steelmaking furnace. The steel b... |
 |
LADLE FURNACE ROOFING | LF roofing is round-shaped and has a tube-type water-cooled structure. It is divided into a large furnace roof, a small ramming roof, an offgas exh... |
 |
VOD VACUUM OXYGEN DECARBURIZATION | VOD VACUUM OXYGEN DECARBURIZATIONVD/VOD Furnace The equipment structure of a VOD furnaceis basically the same as that of a VD vacuum refining fu... |
Same products
 |
SDS-05030 0.50mm Diameter 30mm Length Glued Steel Fiber | 卖方: Tengzhou Star Smith Metal Products Co.,Ltd | This kind of steel fiber is made of high-speed wire, when you add it to concrete, which can impro... |
 |
SDS Micro Copper Coated Steel Fiber | 卖方: Tengzhou Star Smith Metal Products Co.,Ltd | Micro brass fibers are made of copper coated steel wire , which is the most important materials o... |
 |
SDS Loose Hooked End Steel Fiber | 卖方: Tengzhou Star Smith Metal Products Co.,Ltd | Hooked end steel fibres are made of high-quality cold drawn steel line, in order to make sure tha... |
 |
SDS Glued Hooked End Steel Fiber | 卖方: Tengzhou Star Smith Metal Products Co.,Ltd | Glued hooked end steel fibre is made of high quality cold-drawn wire. The glued steel fiber in bu... |
 |
SDS Steel Fiber | 卖方: Tengzhou Star Smith Metal Products Co.,Ltd | There are many types of steel fibre used in concrete. The steel fiber for concrete reinforcement ... |
