ck61125 CNC turning horizontal lathe
Features:
High quality metal siemens controller cnc lathe ck61125 cnc turning horizontal lathe machine45# steel forged spindle, with high speed, high precision and strong rigidity; the spindle speed adopts manual four-speed speed change, with stepless speed regulation in the gear, which greatly reduces the probability of machine tool operation failure. Mature structure, stable performance, easy programming and simple operation.
bed rails
The guide rails of the bed are finely ground after ultrasonic quenching. They have high hardness, good rigidity and long service life. The slide adopts guide rail surface plasticization process, which has good wear resistance and high precision.
High-strength gray cast iron resin sand mold integral casting
The casting is tempered twice to eliminate the internal stress in the casting itself. The whole machine is good, the processing accuracy is high, and long-term use ensures the stability of the machine tool.
Headstock
The four-speed spindle speed regulation adopts a gearbox structure, especially the three-point support of the spindle of this machine tool, which has high speed, high precision, strong rigidity, small thermal deformation, stable operation and low noise.
controller system
The standard is GSK980TB3 controller system, optional Siemens, Fanuc or Syntec controller system. Simple and easy to operate, comes with operation manual.
Tailstock
There is a device inside the tailstock sleeve to prevent the drill bit from rotating, which prevents damage to the taper of the inner hole of the tailstock sleeve due to drill bit rotation caused by misoperation, and effectively protects the tailstock assembly.
Chuck
The standard chuck is a 3-jaw manual chuck, and the optional configuration is a 3-jaw or 4-jaw hydraulic hollow chuck.
turret
The standard turret is a 4-station electric turret, and the optional 6/8-station electric turret or 12-station living turret is available.
Optional configurations ( high quality metal Siemens controller CNC lathe ck61125 CNC turning horizontal lathe ) :
在线联系供应商
Other supplier products
 |
ck61125 automatic metal turning CNC lathe | 45# steel forged spindle, with high speed, high precision and strong rigidity; the spindle speed adopts manual four-speed speed change, with steple... |
 |
sm325 China automatic high precision swiss 2 spindle cnc lathe machine | sm325 China automatic high precision swiss 2 spindle cnc lathe machineconfiguration vice spindle, belonging to the turning and milling compound mod... |
 |
TCK40 Hydraulic Power Incline Lathe CNC Machine Tool Drive Turret | Function: ♦Maximum swing bed: 450mm ♦Maximum cutting diameter: 120 mm ♦Clamping: 6” hydraulic chuck ♦Distance bet... |
 |
vmc650 High Precision Metal CNC Vertical Machine Center | Standard configuration (China factory Siemens controller vertical machine tool center with 24-arm ATC vmc650 high-precision metal CNC vertical mach... |
 |
vmc1160 24ATC Taiwan-made CNC milling machine | vmc1160 24ATC made in taiwan cnc milling machine cnc milling machine magnetic table with fanuc/GSK systemThe spindle uses precision-grade tapered b... |
Same products
 |
Filton Filter Air Filter LW-1254 | 卖方: Filton Tech (Shanghai) Co., Ltd | Filton Filter Air Filter LW-1254 Filton LW-1254Air Filter for X5 (E70) 3.0 sd Black PP panel Ca... |
 |
Filton Filter Air Filter LW-1245 | 卖方: Filton Tech (Shanghai) Co., Ltd | Filton Filter Air Filter LW-1245 Filton LW-1245Air Filter for Z4 (E89) sDrive 20 i Black PP rou... |
 |
Filton Filter Air Filter LW-1242 | 卖方: Filton Tech (Shanghai) Co., Ltd | Filton Filter Air Filter LW-1242 Filton LW-1242Air Filter for X3 (F25) xDrive 28 i Black PP rou... |
 |
蝴蝶孔轻型货架 | 卖方: 南京欧曼物流科技有限公司 | 工厂每层 500KG 粉末涂层金属轻型仓库存储架 车库货架 我们为仓库、超市或商店提供各种货架，您可以在一家公司买到所需的所有产品，这种一站式采购可以节省您的时间和成本。 |
 |
穿梭车货架 | 卖方: 南京欧曼物流科技有限公司 | 无线电穿梭货架是半自动仓库管理的一项创新，可存储高达总面积 90% 的货物。穿梭车可由远程装置控制。通过位置控制系统，货物进出货架的过程既快捷又准确。 |
