XSA 140644N 交叉滚子回转支承 742.3x574x56mm
描述 XSA 140644 N 交叉滚子回转支承
尺寸(ODXIDXH) 742.3x574x56mm
外径(OD) 740.3 mm
内径(ID) 574 mm
宽/高/(H) 56 毫米
重量 52 公斤
材料 42CrMo, 50Mn
滚球品牌LYC球
牙齿数据
做 732 毫米
米 6
牙齿数 122
包装内包装：塑料薄膜+牛皮纸+蓝色胶带； 外包装：标准出口免熏蒸木箱。
在线联系供应商
Other supplier products
 |
3 列串联轴承现货供应 M3CT420EA 4x20x32mm | The thrust cylindrical roller bearing M3CT420EA with size 4x20x32mm , the inner diameter:4 mm, the outer diameter:20mm, the total height:21mm T... |
 |
管绞机使用单列圆柱滚子轴承 526748 轴径 1320mm | 轴承代号 526748轴承内径1320mm结构单列圆柱滚子润滑油 高速油润滑轧辊环材料GCr15SiMn滚筒材质GCr15保持架材料黄铜精密级 P5 P6 可用应用 钢丝绳、钢丝绳管绞机交货时间 60 天特点将用于高速管绞机 |
 |
f-59224.t4ar twin screw extrudes machine bearing | f-59224.t4ar twin screw extrudes machine bearing F-59224.T4AR f-213621.t6ar bearings specification as following: Bearing Old bearing code ... |
 |
挤塑机串联轴承现货 M4CT2264 22x64x102.5mm | Tandem Thrust BearingsM4CT2264 can receive heavy load in a limited space and support firmly in the direction of axis and last long with low frictio... |
 |
挤出机齿轮箱串联轴承五级推力滚子 M5CT420 4x20x54mm 库存 | 串联推力轴承 M5CT420 设计用于水平轴应用（挤出机齿轮驱动），必须施加足够的推力载荷以防止滚子滑动。 通常，所需的最小载荷表示为轴承额定动载荷 (C) 与施加载荷 (P) 的比率。 必须避免 C/P > 12 的负载，并且应避免 C/P 介于 8 和 12 之间的负载。 M5CT4... |
Same products
 |
Extrusion gearbox shaft use the tandem roller Bearing F-81616T4AR | 卖方: JinHang Precision Bearing Co.,LTD | The bearing F81616T4AR mainly used for the high speed extruder machine gearbox shaft. It consisit... |
 |
Slewing Bearing For Excavator | 卖方: Ningguo Swbtec Industry Co.,Ltd | SWBTEC, as one of the leading slewing bearings suppliers, provides high perfomance solutions of s... |
 |
Slew Bearing For Stacker Reclaimer | 卖方: Ningguo Swbtec Industry Co.,Ltd | We often see aerial work platform at work in our daily life, as it is widely used in our daily li... |
 |
Worm Gear Slew Drive | 卖方: Ningguo Swbtec Industry Co.,Ltd | Worm Gear Slew Drive is a part with slewing bearing as the transmission and housing, worm gear as... |
 |
Three Row Roller Slewing Bearing | 卖方: Ningguo Swbtec Industry Co.,Ltd | Three Row Roller Slewing Bearinghas three rings with three raceways, so it can bear very high axi... |
