Spray Foam Gun
Spray foam gun
In the process of spraying materials, spray foam gun is essential. The spray foam gun needs to mix the material quickly during the spraying process, which needs to be done at a very fast speed, because the bonded material begins to harden immediately. Therefore, no material can be retained in the foam gun for a long time. Excess material needs to be removed from the best spray foam gunduring the purging process.
Features of spray gun foam
Spray foam guns are important to the process of applying sprayed materials. They can mix the materials during the spraying process, which ensures high efficiency and prevents the combined materials from hardening due to remaining in the spray foam gun for a long time.
Advantages of spray foam gun
-lightweight;
-body made of aluminum with a metal trigger;
-great precision;
-flow control mechanism;
Spray foam gun provided by Zego spray gun factory has access to hard-to-reach areas. It also has large flow control knob, which secures the overall system. Besides, the nozzle is replaceable. The excellent design can prevent dripping.
Tips of spray foam gun
If you take care of it, it is a good tool. Follow the tips below:
-Protect the tip. Do not damage it. If you do not protect it carefully, it will begin to clog or leak.
-Wipe the tip after using. Avoid foam on the tip.
-If you use this upside down (can facing down) it will work for about 3 seconds and then start spraying gas only. This will make the can last a lot shorter and you will cause it to dribble and make it a pain in the butt to use.
Spray foam gun common fault and solutions
-Air bubbles appear in the gun pot
Cause 1：Spray gun nozzle set is not tightly installed
Result: Air enters the paint channel and bubbles appear in the gun pot when spraying.
Solution: Tighten the nozzle.
Cause 2: Blockage behind the nozzle
Result: Paint residue prevents the nozzle from sealing 100% with the air diverter ring.
Solution: Clean the nozzle carefully.
Cause 3: Damage to the surface of the air diverter ring
Result: Air entered the paint channel due to improper disassembly.
Solution: Replace the air diverter ring.
Cause 4: Clogging of gun pot venting hole
Result: Due to the vacuum, air will be sucked into the paint channel and bubbles will appear first and then the paint will leak.
Solution: Clean the gun pot vent hole and replace the gun pot if necessary.
As a professional spray gun factory, ZEGO has high-quality spray gun kit for sale. Welcome to contact us if needed.
在线联系供应商
Other supplier products
 |
INDUSTRIAL SPRAY GUN | The industrial paint spray gun is specifically designed for automotive body and industrial work, providing excellent results and mirror-like paint ... |
 |
CLEAR COAT SPRAY GUN | Description of Clear Coat Spray Gun ZEGO best paint gun for clear coatprovides better and effective protection from paint, primer and frames from ... |
 |
GREASE SPRAY GUN | Grease spray gun A grease spray gun is a tool used for lubrication. It is used to apply lubricant through an aperture to a specific point. There a... |
 |
AIR HOPPER GUN | Founded by talented engineer Mr. Rifu Zheng in 2011, ZEGO is a China-based spray gun companythat manufactures professional auto refinishing and ind... |
 |
BEST AUTO PAINT SPRAY GUN KIT TH201AG | HVLP/MP/HP All climates Gravity feed No o-ring design Left-hand friendly High-grade S.S tip & needle Wide pattern Waterborne compatible ... |
Same products
 |
NOZZLE SET | 卖方: TAIZHOU TOOL-BAR MACHINERY CO.,LTD. | How to choose the paint sprayer extension nozzleset? For different types of coatings, there are ... |
 |
INDUSTRIAL SPRAY GUN | 卖方: TAIZHOU TOOL-BAR MACHINERY CO.,LTD. | The industrial spray gunis specifically designed for automotive body and industrial work, providi... |
 |
CLEANING KIT | 卖方: TAIZHOU TOOL-BAR MACHINERY CO.,LTD. | As one of the most professional spray gun suppliers, we provide automotive spray gun, spray gun k... |
 |
CAR PAINT SPRAY GUN | 卖方: TAIZHOU TOOL-BAR MACHINERY CO.,LTD. | Founded in 2011, ZEGO Tool-bar upholds the production of professional industrial paint spraying t... |
 |
BEST AUTO PAINT SPRAY GUN KIT TH201AG | 卖方: TAIZHOU TOOL-BAR MACHINERY CO.,LTD. | HVLP/MP/HP All climates Gravity feed No o-ring design Left-hand friendly High-grade S.S tip ... |
