Adjustable Fill Valve
1.G1/2 , G15/16" POM plastic thread and G3/8 brass thread
2.Adjustable height :7.5"-10.5"', 8.5"-12.5"
3.anti-siphon device installation to make sure it can not siphon under 0.8mpa pressure
4.Pressure design, Momentary shut off and Anti-siphon
5.Free from leakage under 1.6mpa pressure
6.Refill pipe, adjusted refill rate 0-30% by the available different refill stopper
7.Simple water level adjustment , the range for optional water level adjustment:0-2"
8.Prevents impurity from fill valve and easy to clean
Other supplier products
|
Flapper Single Flush Valve |
1.Flapper flush valve with two pieces toilets
2.2-11.5NPSM thread is applicable to the φ62--φ65 flush valve hole
3..ABS material .resist ... |
|
Dual Flush Valve with Bracket |
1.Applicable to two -piece china toilet tank, The main flush valve height can be adjusted in accordance to the framework from 343mm to 460mm
2.Ove... |
|
Single push button |
1. Finish: Chrome plating faced
2. Material:ABS
3. Surface : Flat.
4. Shape: Round.
5. Push: Single push button
6. Colors:Sliver and black
... |
|
58 MM Dual push button |
1. installation dimension: 58 mm
2. Gentle touch. Press button easily.
3. Easy to install and maintain.
4. Anti-corrosion.
5. Adjustable instal... |
|
Cistern Mechanism - Flapper single flush valve with bracket |
1.Flapper single flush valve
2.UPC approved
3.PVC flapper available
4.Plastic or S.S. chain available |
All supplier products
Same products