WATER-COOLED PANELS
CHNZBTECH, a professional water cooled panelssupplier, is committed to getting those standards, engineering and manufacturing water-cooled panels and equipment at our own facilities, especially for EAF, LF, and SAF, so as to achieve the high-quality standards now expected by steel furnace manufacturers.
Because the major causes of unscheduled downtimes in steel plant production are also failures of water-cooled panels a plant's availability index is increased significantly when CHNZBTECH's high-efficiency and high-reliability water-cooled components are mounted. This performance is reached by continuous quality monitoring of our standard manufacturing procedures and materials (boiler type / low-carbon steel tubes, copper tubes), assembling and welding procedures, and pre-delivery tests. All this is provided, together with the on-time delivery company policy.
FEATURES
CHNZBTECH WATER-COOLED PANELS FEATURES
EAF, LF SAF Steel and copper panels
EAF shell sidewall panels
LF/EAF roof panels
VD/VOD water-cooled shield
Fume-treatment plant water-cooled duct (primary water-cooling system).
CHNZBTECH strength:
Standard EAF shell panels: 4000 heats
Roof panels: 5,000 heats
Long-life energy saving panels: more than 11x`,000 heats
DESCRIPTIONS
WATER-COOLED PANELS DESCRIPTIONS
A water cooling panel forms a part of or substitute for the wall of a metallurgical furnace, such as an electric arc furnace, LF furnace, VOD, AOD furnace. These industrial furnace parts can be formed alternately as tube type coolers formed of parallel pipes connected at its ends in headers, with the latter having internal baffles to define a serpentine path, or as box type coolers formed of steel plates or sheet and having internal baffle plates defining a serpentine path for the cooling fluid. In either case, fluid orificies are provided to permit a minor amount of flow through the baffles or baffle plates where there is a direction change in the serpentine flow path. This serves to prevent stagnation and prevent the problems of hot spots and steam bubbles where there is a change of direction in the cooling flow. Projections welded along the furnace-facing side of the panel permit the panel to be covered with a layer of refractory material or solidified slag.
Send product request
Other supplier products
 |
SCRAP BUCKET | In steelmaking equipment, the scrap bucketis a device for loading scrap steel, used to inject scrap steel into the steelmaking furnace. The steel b... |
 |
OXYGEN LANCE MANIPULATOR | The carbon-oxygen lance mainly refers to the EAF smelting, generally referring to the carbon-oxygen lance at the EAF furnace door, as well as the f... |
 |
LADLE FURNACE ROOFING | LF roofing is round-shaped and has a tube-type water-cooled structure. It is divided into a large furnace roof, a small ramming roof, an offgas exh... |
 |
SILICON METAL FURNACE | SILICON METAL FURNACE Industrial silicon (also called crystalline silicon, metal silicon) is one of the important materials in modern industrial p... |
 |
EAF ROOF | In the past, the EAF (electric arc furnace) roof mostly used plate type fully water-cooled furnace covers, masonry furnace covers, or plate type se... |
Same products
 |
Steel Searcher Steel Product & Hardware | Seller: STEEL SEARCHER HONG KONG LIMITED | Steel Searcher is a professional steel hardwareproduct company that provides comprehensive steel ... |
 |
Frac PU Layflat Hose | Seller: SUZHOU SEAPEAK CO.,LTD | The outer cover of our PU layflat hose has been produced with extra thickness for tough environme... |
 |
SDS-05030 0.50mm Diameter 30mm Length Glued Steel Fiber | Seller: Tengzhou Star Smith Metal Products Co.,Ltd | This kind of steel fiber is made of high-speed wire, when you add it to concrete, which can impro... |
 |
SDS Micro Copper Coated Steel Fiber | Seller: Tengzhou Star Smith Metal Products Co.,Ltd | Micro brass fibers are made of copper coated steel wire , which is the most important materials o... |
 |
SDS Loose Hooked End Steel Fiber | Seller: Tengzhou Star Smith Metal Products Co.,Ltd | Hooked end steel fibres are made of high-quality cold drawn steel line, in order to make sure tha... |
