Hot Pressing Machine

Various of kinds of hot pressing plate used in hot pressing machine in lumber trade and in plateform sulphurating machine in rubber trade.

hot pressing plate

Various kinds of hot pressing plate used in hot pressing machine in lumber industry and plateform sulphrating machine in rubber industry.

Valve

YM

Valve

YM

timing belt pulley

Company: 慈溪汇鑫同步带有限公司

Synchronous belt drive is composed of an inner circle surface which has a seal ring belt and its corresponding pulley with equal distance gear. While in motion, belt tooth and tooth groove of pulley bite transmit motion and dynamic force. It's a bite transmission, thus has respective advantages of gear drive, chain drive and belt drive, (see attached table) Timing belt drive has accurate transmission ratio; with no slip. It may obtain constant speed ratio, absorb vibration. It's of stable transmission; low noise; large transmission ratio scope which may normally reach to 1:10. Allowable linear speed may reach to 40m/s. It's of high transmission efficiency which may normally reach to 98%-99.5%. It transmits power from several watt to hundreds of thousands watt. Its compact structure is also suitable for multi-axle drive. It's of small tension and non-pollution. It needs no lubrication, therefore it may work normally under occasions which don't allow pollution and has awful working environment. It's widely applied in auto, tobacco, textile, chemical & light industry, metallurgy, instrument & meter, mine, petroleum, machine tool etc mechanical device drive
arrangements.
This company's "Huixin" timing belt has merits such as superior antibent function, small elongation, high strength etc. It also has fine performances such as oil; heat; ageing; ozone; crack resistance etc. In order to guarantee good quality of timing belt series products, its main raw materials (e.g.backbone material, rubber etc) have been designated to purchase from overseas specialized leading manufacturers. The products performance completely conforms to or surpasses the technical demands stipulated by international standards, national standards and advanced foreign standards.

Air Needle Scaler

良誉

JEW-28 Air Needle Scaler the contour to use the gun shape design, is by the air compressor is the power,Through the piston
motion, causes on the spear head Descaler needle to produce 4500 times/Minute force reciprocal motion,Thus plays the elimination metal surface impurity role, this Air Needle Scaler necessary Descaler needle and needle seat the specification has 2 kinds: Descaler needle diameter 3mm* the length 180mm necessary 28 needle seats to use together and Descaler needle diameter 4mm* the length 180mm necessary 14 needle seats to use together (according to different need, 2 kinds may Exchanging Use),The outside measurement (does not contain Descaler needle length):Long 270mm* high 175mm,Weight: 3.2kg

Functions and characteristics of products:
*The product can be used for derusting, polishing, deburring, electric welding slag removing and welding slot unknitting/ leveling on metallic surfaces, in particular, it’s more handy and convenient to treat some special positions such as accidented and twisty parts, inside and outside diameter of pipes,etc. so it’s an ideal tool compared with common grinding
and polishing tools.

*The housing of products is of high quality aluminum alloy, which is firm and durable. The design is reasonable, and hand feeling during operation is comfortable. Inside parts are of precise structure and good material. In the course of operation, this tool is of low vibration and noise.

*The product is mainly used in vessel building and repairing, vehicle manufacturing, large boiler producing and good-sized
mechanical equipments making etc.

Descaler needle

良誉

Zhejiang Ningbo Liangyu Metallic Products factory was established in 2002, is the Chinese domestic specialized production [Descaler needle] manufacturer, this product formed a complete set specially in each kind [Air Needle Scaler ], this factory production Descaler needle is with the specific installation, the special steel products processing became, the production craft was advanced, its degree of hardness and the tenacity were extremely suitable use in each metal surface elimination rust spot, rubbed throws the electricity welded joint and the metal uneven surface eliminates the rust, the depainting, eliminates welds dregs processing, in the shipbuilding ship repair yard, enterprises and so on vehicles factory used
especially quite widely, should Descaler needle the verticality extremely to be also good,Each target achieved completely the overseas similar product the standard, the product sells in distant markets the overseas, the quality is worth feeling relieved.

At present, this factory produces 3 kind of specifications Descaler needle, model: GZ-2:Diameter 2mm* length 180mm, model:
GZ-3:Diameter 3mm* length 180mm, model: GZ-4:Diameter 4mm* length 180mm, year production quantity surpasses 2,000,000, like the merchant needs the different size Descaler needle, this factory also may make, welcome the domestic and foreign merchants to consult the purchase zealously.

Water electricity equipments

spherical plain bearings

sdt

XIAMEN STARTER MACHINERY CO..LTD is a specialized group company engaged in spherical plain bearings. It is mainly engaged in spherical plain bearing design, manufacture and management. We can supply various bearings, mainly including radial joint bearings, joint bearings for pole end, stainless steel joint bearings as well as other kinds of special plain bearings. All the products are designed and produced according to the international standards; they are widely used in the machinery of mining, metallurgical, engineering, electrical power equipment, traffic, space, medicine etc. SDT products are very popular home and aboard because of the good quality and the excellent service. They are being sold well both in the domestic market and overseas market.

Our company not only has the advanced spherical plain bearing design experience and manufacture method but also has the consummate examination way and the test installation. Full aspects of inspections and tests towards the theorization, intensity, dimension and endurance has been distributed to the whole process from the entrance of raw materials and fittings to the exit of products. Advanced production techniques, complete inspections, testing and control methods are the root for XIAMEN STARTER MACHINERY CO..LTD to occupy the market.
our company has always been very highly commended by all the customs for the stable quality of the product, the consummate service system, the materially beneficial unit price.

Water electricity equipments

Water electricity equipments