TJL-4 Column Type Tension Load Cell
With the characteristics of imple structure, high reliability and good interchangeability, the column type tension wireless load cellis suitable for various proportioning scales, hopper scales, hook scales, etc.
Specifications of TJL-4 Column Type Tension Load Cells
Technical Parameter |
|
Rated Load |
1~200 kN |
Comprehensive Precision |
|
Sensitivity |
|
Creep |
±0.05% FS/30min |
Zero Output |
±1% FS |
Temperature Effect On Zero |
±0.05% FS/10℃ |
Temperature Effect On Output |
±0.05% FS/10℃ |
Operating Temperature Range |
-20~+65 ℃ |
Input Resistance |
380±10 Ω |
Output Resistance |
350± 3 Ω |
Insulation Resistance |
>5000 MΩ |
Safe Load Limit |
150% FS |
Bridge Voltage |
Reference 10V DC |
Material |
Alloy Steel or Stainless Steel |
Load Cell Mode Of Connection |
Input+: Red |
Input-: Black |
|
Output+: Green |
|
Output-: White. |
Send product request
Other supplier products
TJH-3A Column Type Load Cell | Small range TJH-3, Small size, easy to install. The comprehensive precision of the load cell is high.It can choose weighing module or built-in ampl... | |
MAKE FORCE SENSORS SAFER AND SMARTER | Widely used in various occasions requiring force measurement and process monitoring. TBP-1 Diffused resistive pressure transducer Mainly used... | |
TJL-9 Tension Compression Load Cell | Good sealing performance, high precision. Suitable for various batching scales, hopper scales, hook scales and other testing equipment. Specific... | |
TJL-8 Column Type Rod End Load Cell | With the characteristics of the wide range of measurements, safe and reliability, our column-type tension cheap load cellis suitable for the measur... | |
TJL-3B Stainless Steel Load Cell | This typetension threaded load cellis made by stainless steel, high precision, small size. Suitable for force detection equipment such as medical i... |
Same products
Extrusion gearbox shaft use the tandem roller Bearing F-81616T4AR | Seller: JinHang Precision Bearing Co.,LTD | The bearing F81616T4AR mainly used for the high speed extruder machine gearbox shaft. It consisit... | |
LEFOO AIR COMPRESSOR CUT OFF SWITCH | Seller: LEFOO INDUSTRIAL CO.,LTD. | Air Compressor Cut Off Switch Pressure Range: 15~60psi / 40~250psi / 400~500 psi Stable and acc... | |
Lefoo 115VAC RO Diaphragm Booster Pump | Seller: LEFOO INDUSTRIAL CO.,LTD. | Low vibration and low noise, self-priming and stable pressure feeding, LEFOO 115VAC RO Diaphragm ... | |
LEFOO BRUSHLESS RO BOOSTER PUMP | Seller: LEFOO INDUSTRIAL CO.,LTD. | This brushless RO booster pump series is powered by a permanent magnet brushless motor, 0.5/0.7 M... | |
LEFOO PRESSURE TRANSMITTER MANUFACTURER | Seller: LEFOO INDUSTRIAL CO.,LTD. | A pressure Transmitter (pressure transducer) converts the physical quantity 'force per area' into... |