LEFOO DIGITAL PRESSURE SWITCH
LEFOO DIGITAL PRESSURE SWITCH
Pressure Range: -100~100kpa
Pressure Accuracy: 1%FSO
Work Temperature: 0~50 °C
Measure media: Non-corrosive dry gas
Output: digital 4~20ma/1~5V, Swith NPN /PNP
Digital Pressure Switch LFDS10
Digital Pressure Switch LFDS62
Pressure Controller LFDS63
Pressure Switch Controller LFDS65
LEFOO DIGITAL PRESSURE SWITCH PRESSURE MEASUREMENT
The piezo-resistive works on a Wheatstone bridge principle that will undergo deformation due to pressure on its area and change resistivities on 4 bridges, this is called the piezo-resistive effect. Usually, four strain gauges are embedded and connected to a Wheatstone bridge. The signal amplifier amplifies the measuring signals from the strain gauge and Wheatstone bridge and synchronously optimizes the results, and the results are transferred by the squeezing electric power of the silicon wafer.
The digital air pressure switchis used to replace electric contact pressure gauges and used in systems with higher requirements for industrial control. This digital LEFOO pressure switch has a wide application in monitoring and controlling the flow of air and aggressive gases. For the consideration of environment friendly and less contaminant we did not use oil-extended silicon sensor. This digital pressure switch is built in a plastic housing and it might undergo deformation when encounter extreme huge pressure and influence its accuracy. The digital pressure switches made by Lefoo is mainly based on diffused silicon piezoresistive sensor and electric circuit bridge in the relay, that provides both pressure measurement and simple control movement.
The digital pressure switch has a built-in differential air pressure sensor, which amplifies the pressure signal through a high-precision instrument amplifier, collects and processes data through a high-speed MCU, and generally uses a 4-digit LED to display the pressure in real time, and the relay signal output. The upper and lower limit control points can be set freely.
Send product request
Other supplier products
 |
RO BOOSTER PUMP | The purpose of the RO booster pump is to increase water pressure at the preliminarily filtered water chamber and forcing the water through the RO m... |
 |
Submersible Level Transducer LFT3000 | Lefoo Industrial Co., Ltd. was established in 2005, with fifty thousand square meters of floor space. Since its establishment, Lefoo has been commi... |
 |
PRESSURE TRANSMITTER | The pressure transmitter has the application used in pressure measurement of media such as liquids, air, and vapor. Accuracy and stability in the m... |
 |
STEPPER MOTOR PERISTALTIC PUMP | Lefoo Industrial Co., Ltd. was established in 2005, with fifty thousand square meters of floor space. Since its establishment, Lefoo has been commi... |
 |
PRESSURE SENSOR TRANSMITTER | PRESSURE SENSOR TRANSMITTER A pressure sensor is an instrument consisting of a pressure-sensitive element to monitoring the actual pressure and c... |
Same products
 |
LEFOO AIR COMPRESSOR CUT OFF SWITCH | Seller: LEFOO INDUSTRIAL CO.,LTD. | Air Compressor Cut Off Switch Pressure Range: 15~60psi / 40~250psi / 400~500 psi Stable and acc... |
 |
Lefoo 115VAC RO Diaphragm Booster Pump | Seller: LEFOO INDUSTRIAL CO.,LTD. | Low vibration and low noise, self-priming and stable pressure feeding, LEFOO 115VAC RO Diaphragm ... |
 |
LEFOO BRUSHLESS RO BOOSTER PUMP | Seller: LEFOO INDUSTRIAL CO.,LTD. | This brushless RO booster pump series is powered by a permanent magnet brushless motor, 0.5/0.7 M... |
 |
LEFOO PRESSURE TRANSMITTER MANUFACTURER | Seller: LEFOO INDUSTRIAL CO.,LTD. | A pressure Transmitter (pressure transducer) converts the physical quantity 'force per area' into... |
 |
LEFOO PRESSURE SWITCH HVAC | Seller: LEFOO INDUSTRIAL CO.,LTD. | A pressure switch controlis a control device that runs a switch on or switch-off action when a pr... |
