Foundry Green Sand Molding Machine
Microseismic compacting moulding machine can make moulding board, sand box and moulding sand vibrate at high frequency and small amplitude while moulding sand is compacted.
When the sand box is filled with loose molding sand, there are still many gaps between the sand grains. At this time, the formwork is directly vibrated to transfer energy to the sand grains, so that they can find a new balance position in constant movement, thus filling the gaps and improving their compactness.
When additional vibration is added during the compaction process, in addition to the above action, the external friction resistance between sand grains and the inner wall of the sand box can be reduced, further increasing the compaction effect.
Therefore, additional vibration can significantly improve the phenomenon of real-time compaction.
Because microseismic can improve the fluidity of molding sand in the process of compacting, higher average compactness and more uniform compactness distribution can be obtained with the same compactness ratio.
Microseismic compaction molding machine can not only be in the compaction at the same time microseismic, and in the process of sand can also be microseismic, that is, the so-called pre-compaction.
This can increase the amount of sand filling in the sand box and improve the uniformity of the original compactness and compactness of the sand mold.
It can reduce the height of the prefill and the travel of the compacting piston, especially for the high sand box or complex model.
Send product request
Other supplier products
 |
Sand Blasting Room | 1) Doors: The service door is built in welded profiles and has a closing in steel plates, and is internally coated with abrasion resistant rubber. ... |
 |
Hydraulic pressure Sand Molding Machine | the machine for a variety of foundry sand molding clay. the machine can be used stand-along,but also the composition of the use of mechanized assem... |
 |
Mobile Bridge Deck Shot Blasting Machine | Floor Shot Blasting is a cost-effective and environmentally friendly method for preparing concrete and steel surfaces. This labor and time-saving p... |
 |
Foundry Hot Box Sand Core Shooter | Hot box coreshooter refers to the product cured by heating, usually heating on the mold, also known as hot core box mold, through the core shooting... |
 |
Steel Pipe External Wall Shot Blasting Machine | The steel tube outer wall shot blasting machine is suitable for the surface treatment and strengthening of steel tubes and cylinders. The workpiece... |
