Brushing RTV-2 mold silicone rubber
1.Application of Brushing molding silicone rubber :
Brushing molding silicone rubber mainly used for shoe molds, sand casting, sole sampling, plaster models, simple products, products with non-complex patterns, as well as product models with stable size and non-deformation.
2.Operation instruction of Brushinng silicone rubber :
Brushing molding silicone rubber is composed of two components.Component A is white flowing liquid while component B is the curing agent.
Steps:
a.take silicone rubber of 100g and add 2% curing agent for mixing evenly.
b. After the silicone rubber and the curing agent are completely mixed, put the silicon into a vacuum machine for deairing to remove the bubbles.
c.After deaired, pouring the liquid silicone rubber into the product to be duplicated or into the mold frame.
Note: brushing molding silicone rubber is used for pouring or brushing technique. That is to say,
firstly fix the product or sole model to be duplicated onto a plane plate,
then enclose the plane frame with wooden plates to prevent the leakage of the silicon ,
thirdly mix the silicone rubber and the curing agent evenly according to the mixing ratio of 100 : 2 and pour them onto the sole model,
at last brush evenly with a wooden plate or a brush, and fill up the mold frame with gypsum after the silicone rubber is dried.
3.Storage and Precautions of Brushing molding silicone rubber :
Brushing molding silicone rubber, which is an environmentally-friendly liquid silicone product, is not easy to burn and can be stored and transported as non-hazardous goods. The shelf life of the product is about one year from the date of production. Inspection is required when exceeding the time limited. It can continue to be used in case of neither thickening nor deterioration.
Send product request
Other supplier products
 |
liquid pad printing silicone rubber | 1.The application of pad printing silicone rubber: Pad printing silicone rubber with high printing times and abrasion,resistence,without any inp... |
 |
RTV silicone rubber for manual mold design | Applications of RTV silicon rubber: Silicone rubber is mainly applicable to manual mold design, PVC plastic molds, cement product molds, melting ... |
 |
RTV-2 silicone | Application of RTV-2 silicone rubber RTV- silicone rubber is mainly be used as following: 1. Decoration building mould making, including archite... |
 |
Addition Silicon Rubber | Main features: Low Viscosity, good operability, exceptional fluidity , good temperature, solvent resistance, and insulation properties, excellent... |
 |
RTV Silicone Rubber for Sculpture Mold with SGS, MSDS, RoHS | Usage of rtv silicone rubber for sculpture mold RTV silicone rubber for sculpture mold is intended for making silicone rubber mold for resin cra... |
Same products
 |
STABURAGS NBU 12300 25kg for SMT Production Line | Seller: Guangdong Juguangheng Automation Equipment Co.,Ltd. | Three Bond 2706 Oil &Grease Removing Agent 420ML/PC10PC/Carton BIRAL T&... |
 |
Bare Copper Wire for Electrical Purpose | Seller: Ningbo Jintian Copper (Group) Co., Ltd., | Electrical Bare Copper Wirefor Electrical Purpose Copper's excellent electrical and thermal cond... |
 |
Bare Copper Wire (8mm) | Seller: Ningbo Jintian Copper (Group) Co., Ltd., | Bare Copper Wire (8mm) The electrical round copper wire products produced by our company are wid... |
 |
Anti-dezincation Brass Rod | Seller: Ningbo Jintian Copper (Group) Co., Ltd., | Anti-dezincation Brass Rod The anti-dezincification copper rods produced by our company can be... |
 |
Anti-Corona Magnet Wire | Seller: Ningbo Jintian Copper (Group) Co., Ltd., | Anti-Corona Soldering Magnet Wire The anti-coronaenameled copper wirefor frequency conversion mo... |
