Class 125 Valve
Class 125 valveis a pressure rating designation defined by standards organizations, such as the American National Standards Institute (ANSI) and the American Society of Mechanical Engineers (ASME). It indicates the maximum pressure that a valve can withstand under normal operating conditions.
Class 125 Pressure Rating
Gate valve class 125is a pressure rating designation defined by standards organizations, such as the American National Standards Institute (ANSI) and the American Society of Mechanical Engineers (ASME). It indicates the maximum pressure that a valve can withstand under normal operating conditions.
Class 125 Pressure Rating Value
Class 125 valves are typically rated for a maximum working pressure of 125 psi (pounds per square inch) or 8.6 bar.
Class 125 Valve Applications
Class 125 valves are commonly used in applications where the operating pressure does not exceed 125 psi. They are often employed in low-pressure systems, such as residential, commercial, and light industrial plumbing applications.
If you are looking for a reliable valve manufacturing company, don't hesitate to contact us!
Send product request
Other supplier products
 |
3 Inch Ball Valve | A 3 inch threaded ball valve is a type of valve that has four ports, enabling two independent circuits. This allows for greater flexibility and con... |
 |
Class 150 Valve | globe valve class 150is a pressure rating designation defined by standards organizations, such as the American National Standards Institute (ANSI) ... |
 |
Check Valve 8 | Swing Check Valve is a commonly used valve type, usually used to prevent the reverse direction of liquid flow. Its structure is simple. The check v... |
 |
Check Valve 50mm | Check Valve 50mmis a butterfly check valve connected to the pipeline, which can prevent the backflow of the medium and the change of the pipeline p... |
 |
Butterfly Valve DN200 | Soft seal butterfly valve dn200is a control valve with adjustable flow and pressure. It consists of valve body, rotatable plate, gasket and other c... |
Same products
 |
Клапан | Seller: RongTengXinNuo(Tianjin) International Trade Co.,Ltd | Клапан |
 |
Class 300 Valve | Seller: GangYe Group Co.,Ltd. | Class 300 valves have a pressure rating of 300 pounds per square inch (psi) or 20.7 bar, allowing... |
 |
Class 3000 Industrial Valve | Seller: GangYe Group Co.,Ltd. | Wafer Body, Full Port Design, Flanged End Class 3000 Ball Valve. A ball valve class 3000pressure-... |
 |
Class 2500 Industrial Valve | Seller: GangYe Group Co.,Ltd. | Class 2500 valves can be used for both on-off and throttling applications. The specific valve typ... |
|
|
Class 150 Valve | Seller: GangYe Group Co.,Ltd. | globe valve class 150is a pressure rating designation defined by standards organizations, such as... |
