Piezo Clamps/Piezo Forceps gripping displacement to 80um for wire bonding machine
According to the requirements of automatic wire bonding machine, CoreMorrow produces piezo clamp, which is designed and developed for clamping wire. It feaures a simple structure, fast response and high resolution. Characteristics • Displacement to 100μm • Sub-millisecond response time • Resonant frequency to 1.5kHz • Small size Principle The structure of piezo clamp is composed of piezo stack, flexible mechanical structure, fixed jaw and adjustable jaw. Piezo stack is installed between clamping jaw and the base. When voltage is applied to piezo stack, the output displacement of the piezo stack is amplified by the lever arm of the clamping jaw and outputed in the top end of the closed. After the voltage is removed, the of clamp jaws return to initial position. Technical Data Type:XD002.90K Active axes:X Travel range(0~120V): ±40 µm±20% Travel range(0~150V): ±50 µm±20% Push/pull force capacity: 10/1 N Stiffness: 0.04 N/μm±20% Unloaded resonant frequency: 1500 Hz±20% Unloaded step time: 0.7 ms±20% Unloaded operating frequency: 300 Hz Load capacity: 0.05kg El. Capacitance: 0.18μF±20% Material: Steel Mass: 10 g±5% Power-on jaw status: Open Type:XD002.150K Active axes:X Travel range(0~120V): ±60 µm±20% Travel range(0~150V): ±75 µm±20% Unloaded resonant frequency: 1100 Hz±20% Load capacity: 0.05kg El. Capacitance: 0.17μF±20% Material: Steel Mass: 8.7 g±5% Power-on jaw status: Open Type:XD002.200S Active axes:X Travel range(0~120V): ±80 µm±20% Travel range(0~150V): ±100 µm±20% Push/pull force capacity: 4/- N Stiffness: 0.04 N/μm±20% Unloaded resonant frequency: 400 Hz±20% Load capacity: 0.05kg El. Capacitance: 7.2μF±20% Material: Steel Mass: 305 g±5% Power-on jaw status: Close
Send product request
Other supplier products
 |
Piezoelectric ring stack actuators 150V Z motion sub-nano resolution | Piezoelectric ring stack,Piezo actuator Z motion,nano resolution Type:HPSt150/14-10/x Material Properties Material: PZT(PZT5H) εr... |
 |
H01 Piezo Expanted Actuators 80um Fiber Stretcher 1.5kHz | H01 piezo fiber stretcher is designed for fiber stretching applications. Its principle is to cause the hinge structure outward expansion by the act... |
 |
Large loading capacity preload piezo actuator blocking force to 7300N | Low-voltage piezo actuator is preloaded low-voltage piezo stack inside, and the outside is protected by a cylindrical stainless steel shell. The pr... |
 |
High dynamic multilayer PZT piezoelectric ceramic actuators Nanopostioning | PZT piezoelectric ceramic actuators,High dynamic,Nano postioning Type:PSt150/10*10/x Material Properties Material:PZT(PZT5H) εref... |
|
|
Piezo Clamps/Piezo Forceps gripping displacement to 80um for wire bonding machine | According to the requirements of automatic wire bonding machine, CoreMorrow produces piezo clamp, which is designed and developed for clamping wire... |
Same products
 |
21.5 Inch 1920x1080 FHD 30PIN LVDS-Double IPS 600nits Open Frame LCD | Seller: Shenzhen EXSON Technology CO.,LTD | EX21501-A01 is a 21.5 inch 1920×1080 Resolution IPS TFT LCD module that supports LVDS inter... |
 |
2.4 Inch 240x320 QVGA 6PIN UART TN 220nits TFT LCD Display Module | Seller: Shenzhen EXSON Technology CO.,LTD | EX02402-A01 is a 2.4 inch, UART TN TFT LCD module . The module dimension is 44.02(W)×78.11(... |
 |
2.4 Inch 240x320 QVGA 14PIN SPI4 IPS 250nits TFT LCD Display Module | Seller: Shenzhen EXSON Technology CO.,LTD | EX02401-A01 is a 2.4 inch, IPS active matrix TFT LCD module with transmissive mode. The module di... |
 |
2.47 Inch 480x480 Round 35PIN MIPI 400nits TFT LCD Display Module | Seller: Shenzhen EXSON Technology CO.,LTD | EX02403-A01 is a 2.47 inch, ADS active matrix TFT LCD module with transmissive mode. The module d... |
 |
2.47 Inch Circular LCD Panel/Screen/Display 480x480 Round 35PIN MIPI 400nits TFT LCD Display | Seller: Shenzhen EXSON Technology CO.,LTD | EX02403-A01 2.47 Inch Circular LCD Panel/Screen/Display is a color active matrix TFT-LCD Panel us... |
