Laser Piezo Objective Scanner Micro Piezo Actuator Z Axis Piezoelectric Linear Stage Micrometer

• 

P72 piezoelectric objective scanner is aZ-axis motion piezo positioner specially designed for objective lens focusing microscopy. It adopts africtionless flexible hinge parallel guiding mechanism, with ultra-high focusing stability. The objective positioner is loaded with amicroscopic detection/measurement or observation device to improve accuracy.

Characteristics
- Travel to 100μm
-Load capacity to 0.2kg
- Millisecond response time
-Closed loop for high repeatability

Typical Applications
- 3D imaging
-Interference/metering
-Surface structure analysis
-Confocal microscope
-Biotechnology
-Semiconductor test


Application Example
P72 piezoelectric objective scanner can be used for automatic cell microscopy, cold atom microscopy and so on.

Adapter Compatible
P72 objective positioner is connected to the objective lens through an adapter to quickly make the objective lens in the desired position. Avariety of thread adapters are available, such as M27×0.75, M26×0.75, M26×1/36", M25×0.75, W0.8×1/36", etc., and custom is available.

Small Size, High Dynamics
P72 Piezo Objective Scanner is very compact. Its body uses aflexible hinge mechanism, which is frictionless and has avery high resolution and it can carry 200g load for high-speed precision motion, it has been widely used in optical scanning, confocal microscopy and other fields.

Closed-Loop Step Time
Step time of 30ms at loading 200g to 100% travel.

P72.Z100 Technical Data:

Models	Suffix S-Closed loop Suffix K-Open loop	P72.Z100S P72.Z100K	Units
Active axis		Z
Travel range(0~120V)		80	μm±20%
Travel range(0~150V)		100	μm±20%
Sensor type		SGS/-
Resolution		5/2.5	nm
Linearity		0.1/-	%F.S.
Repeatability		0.05/-	%F.S.
Push/pull force		110/15	N
Stiffness in motion direction		1.4	N/μm±20%
Unloaded resonant frequency		350	Hz±20%
Unloaded step time		10/3	ms±20%
Closed-loop unloaded operating frequency	10% travel	50	Hz±20%
	100% travel	15
Load capacity		0.2	kg
El.capacitance		3.6	μF±20%
Material		Steel
Mass		150	g±5%

Note: Above parameters are measured with the E00/E01 piezo controller. The maximum driving voltage can be -20V~150V;
For high-reliability and long-term operation, the recommended driving voltage is 0~120V.

Other supplier products

	Linear piezo nanopositioning stages scanners for fluorescence microscope quick step time XYZ stage	Linear piezo nanopositioning stages scanners for fluorescence microscope quick step time XYZ stage ·XYZ stage ·fluorescence microsco...
	CoreMorrow Piezo Fiber Stretchers	H01 piezo fiber stretcher is designed for fiber stretching applications. Its principle is to cause the hinge structure outward expansion by the act...
	Laser Piezo Objective Scanner Micro Piezo Actuator Z Axis Piezoelectric Linear Stage Micrometer	P72 piezoelectric objective scanner is aZ-axis motion piezo positioner specially designed for objective lens focusing microscopy. It adopts africti...
	Piezoelectric stack actuator PZT blocking force to 25000N
	Piezo ceramic ring stack blocking force to 8000N low power consumption	Piezo ceramic ring stack、low power consumption、blocking force to 8000N Type：HPSt150/20-15/x Material Properties Material: PZT(PZT5H) &eps...

Same products

	Achromatic Lens	Seller: TianCheng Optics CO.,Ltd	Achromatic Lensfor Sale An achromatic lensis a lens that is designed to limit the effects of chr...
	GH-SW640Pro-U3 SWIR Camera	Seller: GHOPTO	GH-SW640Pro-U3 SWIR Camera The SWIR Cameraseries feature a 640 x 512 pixel InGaAs focal plane ar...
	WELINK MTP/MPO Adapters	Seller: SHENZHEN WELINK TECHNOLOGY CO., LTD.	MTP/MPO Adapters can accurately connect two connectors and reduce connection loss, mainly used fo...
	WELINK MTP/MPO Cabels	Seller: SHENZHEN WELINK TECHNOLOGY CO., LTD.	MPO/mtp fiber optic cableare designed to avoid crowding and unmanageable data centers, consist of...
	Micro Data Centre	Seller: SHENZHEN WELINK TECHNOLOGY CO., LTD.	A micro data center(MDC) is a small modular data center designed for computer workloads that do n...