Waterproof Automotive Relay JTKW
40 amp waterproof relay are designed to be used in environments where there may be exposure to moisture, such as in marine or outdoor applications. These relays typically have a waterproof sealing material around the contacts and coil to prevent water from getting inside the relay. They are commonly used in automotive applications such as in car alarm systems, power door locks, and other electrical systems.
General Specifications and Features of Waterproof Automotive Relays
01
Contact rating: typically between 10A to 40A, depending on the specific relay model
02
Coil voltage: typically 12VDC or 24VDC, but can vary depending on the specific relay model
03
Coil power: typically less than 1W
04
Contact resistance: typically less than 100mΩ (initial)
05
Insulation resistance: typically greater than 100MΩ (500VDC)
If you are looking for a reliable relay manufacturer, don't hesitate to contact us!
Other supplier products
|
12V Automotive Relay JTV7 |
70A switching capability
Extended temp. range up to 125℃
With transient suppression resistor available
1 Form A contact arrangement
Pla... |
|
Automotive Time Delay Relay JQC-3FF-M |
Contact arrangement
Voltage drop(initial)1)
Electrical endurance
Mechanical endurance
Initial insulation resist... |
|
24V Automotive Relay |
A 24vdc automotive relayis an electrical switch that is designed to handle high current devices in a vehicle's electrical system that require a 24V... |
|
24V Automotive Relay JQC-3FF-M |
The 24V automotive fuse relayJQC-3FF-M is a type of electromechanical switch commonly used in automotive applications. It is a small and compact de... |
|
Standard Automotive Relay JTKW |
Standard universal auto relayJTKW
Contact arrangement
1A, 1B, 1C
Dielectric strength4)
500VAC
Voltage drop(initial... |
All supplier products
Same products