3 Axis Ab Part Potting Machine High Speed 2K Dosing Machine LED Strip Auto Glue Dispensing Machine Dispenser
Full Automatic Potting Machine Ab Glue Dispenser Machine for LED Strip Light
Potting and encapsulation is the process of embedding products & assemblies in a liquid resin (potting compounds) to protect them against rough environment conditions. Potting can be performed in atmosphere pressure or even under vacuum, if high voltage insulation and high temperature differences are needed. Encapsulation of parts will stop corrosion of metals and reduce damage caused by vibration and mechanical stress.
We offer automatic ,se-mi automatic fluid dispensing potting machine and the related production line and vacuuming systems .
General description of the machine
our ab dosing dispensing machine precisely metering, mixing and dispensing two-component medium to low-viscosity materials for potting, dispensing ,sealing, casting ,encapsulation and filling.
For variable ratio dispensing, the system handles ratios from 1:1 to 10:1.
The system is composed of AB tanks, metering pumps and motor, mixing pipe, dual valve, dynamic motor for dynamic stirring and 3-axis robotic platform.
Two kinds of component materials are separately before they mix in mixing tube to avoid glue cure in system. Dispensing valve is with suck-back function to keep thin fluid from dripping.
Introduction :
1. Working Mode: controlled by PLC module and MCGS touch screen.
2.High precision valve: high speed, glue off clean, no glue drawing, no dropping.
Working principle :
Compound materials A & B are kept in two tanks separately. There are two sets of metering pumps inside the machine for metering A and B resin by setting ratio, draining out material individually from tank A & B. Liquid A & B mix with each other in the mixer pipe and dispensed out according to the programmable data.
1. Stainless panel vacuum pressure tank which can bear negative pressure of inner tank .
6 Tank with heater which can preheat materials to assure good flowability .
our Pump technology
Valve technology
1. Dynamic mixing with stirring detecting function that ensure glue mixing evenly .
2 Stainless design of the glue touch surface to capture more higher material compatibility .
3 Glue valve with flow-back prevent function that can prevent glue from dropping when stop gluing .
4 Sealing parts of rod shaft adopt imported parts to keep more higher durability .
5 The self-cleaning function make machine cleaning more easier that you needn't dis-assembly the parts to wash . Cleaning time and cleaning times could be set in the touch screen.
detecting function that detect the speed and running time of pumps to ensure the ratio reliability.
3 Adjustable gluing-out volume make sure glue A/B dispense out at the same time from glue valve to get better glue mixing effect .
4 Machine with gel resistance calculator , which prevent the mixture curing inside .
5 You can set single gluing-out and steady gluing-out function to meet up with your different process requirement .
6 Whole machine system and function is controlled by Panasonic PLC and MGCS touch screen .
7 Reserved PLC communication interface, which easy connecting with outside device .
8 Equipped with a safety lock to prevent staff from wrong operation ..
在线联系供应商
Other supplier products
Two-part Meter-mixing and Dispensing System (MMD system) is the heart of automating 2K liquid dispensing process | Two-partMeter-mixingandDispensingSystem(MMDsystem) is the heart of automating 2K liquiddispensingprocess We offers an automatic dosing machine f... | |
Glue Spraying Machine for Insulation Integrated Board Production Line MGO Panels Fire-Proof Door | Glue Spraying Machine for Insulation Integrated Board Production Line MGO Panels Fire-Proof Door The glue Spraying line is based on the reform o... | |
3 Axis Ab Part Potting Machine High Speed 2K Dosing Machine LED Strip Auto Glue Dispensing Machine Dispenser | Full Automatic Potting Machine Ab Glue Dispenser Machine for LED Strip Light Potting and encapsulation is the proces... | |
Sips sandwich panel glue spraying machine | The glue Spraying line is based on the reform of the traditionalroller glue machine process. With the marketization and standardscale of stainles... | |
2 Part Epoxy Dispensing Machine 2 Part Epoxy Adhesive machine ab component glue dispenser potting machine | transducerEpoxyPottingMachineTransducersEpoxyMeter MixDispenserGlueDispenserEpoxyMixingmachine....AbPartMixing andDispenserAutomaticEpoxyResin Do... |
Same products
MFS-160A 1-8KHZ 160KW 250A Medium Frequency Induction Heating Machine | 卖方: Chengdu Jinkezhi Electronic Co., Ltd | MFS-160A medium frequency induction heating machine inverter uses IGBT as the core component. The... | |
MFS-120A 1-8KHZ 120KW 182A Medium Frequency Induction Heating Machine | 卖方: Chengdu Jinkezhi Electronic Co., Ltd | MFS 120A induction heating power supply adopts IGBT as the core component. As a medium frequency ... | |
Medium Frequency Induction Heating Machine | 卖方: Chengdu Jinkezhi Electronic Co., Ltd | If you need hot forging for large workpieces, smelting for ferrous or non-ferrous metals or deep ... | |
High Frequency Induction Heating Machine | 卖方: Chengdu Jinkezhi Electronic Co., Ltd | The working frequency of CX series ultra high frequency induction heating machinecovers 50KHZ ~ 1... | |
CX2030C 50-120KHZ 30KVA 23A High Frequency Induction Heating Machine | 卖方: Chengdu Jinkezhi Electronic Co., Ltd | CX2030C 50-120KHZ high-frequency MOSFET type induction heater holds the output power of 15KW/30KV... |