Sintered Neodymium Magnets
Sintered neodymium magnet is the strongest magnetic material commercially available today. It is largely made of alloy of neodymium, iron and boron, and the chemical formula is Nd2Fe14B. Sintered NdFeB neodymium magnet exhibits high magnetic energy product in small size with high coercive forces. Examples of applications include permanent magnet motors, loudspeakers, magnetic separators, wind power generators, computer hard drive, and MRI devices.
For more technical information of our sintered neodymium magnet, please refer to the sections of Technological Advantages, Demagnetization Curve, Grades, Magnetic Properties, Physical Properties, Magnetic Parameters, Surface Treatment, Magnetization Orientations.
Technological Advantages
High Coercive Force
Highest Intrinsic coercive force Hcj≥35kOe
High Consistency
CPK of Remanence (Br) and Intrinsic coercive force (Hcj)>1.67
Low Reversible Temperature Coefficient
αBr=-0.08%/℃, βHcj=-0.4%/℃
Low Weight Loss
130℃, humidity 100%, vapor pressure 2.7bar, 20days, average weight loss<2mg/cm2
Demagnetization Curves of Sintered Neodymium Magnet
Grades
The Grade of a magnet generally indicates how "strong" a magnet material is, which is measured by the Maximum Energy Product. The energy product is commonly specified in units of Gauss Oersted. The higher the grade the "stronger" the magnet. The grade also tells the temperature rating of a magnet material. Neodymium magnets have different heat tolerances which determine their maximum working temperature. As the heat tolerance increases the maximum available flux density decreases.
Magnetic Properties of Sintered Neodymium Magnet
Notes:
Surface Treatment
As Neodymium magnet is prone to corrosion, it is usually preferable for the magnet to be coated for protection. Among a variety of options for coatings, nickel and nickel-copper-nickel are the most commonly used, making the magnet more corrosion resistant and durable.
Magnetization Orientations
Magnets can be delivered magnetized and un-magnetized. Some production methods require the magnets being incorporated into assemblies in a un-magnetized state and magnetized later once the assembly is completed. There are various magnetic orientations available for different shapes of magnets.
在线联系供应商
Other supplier products
 |
Threaded Magnets | Material SinteredNeodymiumIronBoron,Steel Dimensions Diameter PullForce 5lbs—900lbs MagnetizationOrientation Axial ... |
 |
Arc/Segment Neodymium Magnets | Specifications for Arc segment magnets Material SinteredNeodymiumIronBoron Dimensions OuterDiameter Customized InnerDiameter Cu... |
 |
Sintered Neodymium Magnets | Sintered neodymium magnetis the strongest magnetic material commercially available today. It is largely made of alloy of neodymium, iron and boron,... |
|
|
Sintered Neodymium Magnets | Sintered neodymium magnet is the strongest magnetic material commercially available today. It is largely made of alloy of neodymium, iron and boron... |
 |
Industrial Magnet Introduction | When we buy industrial magnets, we will encounter various selection problems. This article will introduce the related introduction of industrial ma... |
Same products
 |
Rare Earth Permanent Round NdFeB Countersunk Magnet | 卖方: Dongyang Ma Li Magnet Co., Ltd. | Rare Earth Permanent Round NdFeB Countersunk Magnet are made of NdFeB Ceramic Powder, which is th... |
 |
Pot Magnets With Countersunk(Screw) Hole | 卖方: NingBo BeiLun Meank Magnetics Co.,ltd. | A compact magnet system consisting of a steel shell with high permeability and a countersunk magn... |
 |
Channel Magnets-Rectangular Mounting Pot Magnets | 卖方: NingBo BeiLun Meank Magnetics Co.,ltd. | The magnet assembly composed of a U-shaped ferromagnetic iron shell and a rectangular magnet is c... |
 |
Segment (Arc) Permanent Magnets For Motor | 卖方: NingBo BeiLun Meank Magnetics Co.,ltd. | The segment magnetsdesigned for motors, generators and alternators are neodymium arc segment magn... |
 |
Adhesive Backed Magnets | 卖方: NingBo BeiLun Meank Magnetics Co.,ltd. | Adhesive Magnets Wholesale If you want to use permanent magnets on non-ferromagnetic materials t... |
