SPD for Network / Data Line Surge Protector
Data line protector series are mainly used in TCP/IP communication networks to protect electrical and electronic equipment's signal line from the impact of lightning electromagnetic pulse, induced over-voltage, transient operation, and resonance overvoltage.
Features Of SPD For Network / Data Line Surge Protector
Multi. Protection circuits, Gas-Tube+ TVS technology
Dual protection in Common mode and differential mode
TVS array technology, low capacitance
Multi-Strike Capability
RJ45 connector
Application Of SPD For Network / Data Line Surge Protector
CAT5e and CAT5 compatible
10/100 Base-T Ethernet protection
LAN, FDDI，CDDI, ATM
PDH, SDH, SPDH
Industrial control
Loss prevention system device; Security system; Security integration.
IASP; VSCS; ESA; ACS; exit-inlet control system; exit-inlet control system
Specification Of SPD For Network / Data Line Surge Protection
Model D05J4 D05J4-8 D05J4-16 D05J4-24 D05J8H
Lightning projection zone(LPZ) 2
Standards Compliance IEC61000, EN60950,GB/T18802.21-2002,TB/T2311-2002
According to IEC61643 III
According to DIN VDE6075 Part6(Draft 11.89) A1,A2 D
Max continuous operating voltage Uc 5V
Nominal discharge current (8/20µs) In 3KA
Max discharge current Imax (8/21µs) Imax 5KA
Voltage protection Level
@C2(8/20µs) Up ≤55V
Voltage protection Level
@C3(1kV/µs) Up ≤25V
Rated load current IL 200mA
Limiting Voltage(10/700µs) ≤20V
Cut-off Frequency fG 250MHz
Response time tA (L-N/N-PE) 1ns
Protection line 1/2,3/6 1/2,3/6,4/5,7/8
Protection port 1 8 16 24 1
Mounting Be Installed between protected equipment and signal line
Adapt Transmissionrate 100Mbps 1000Mbps
Transmissionstandards 100BaseT/ 1000BaseT/1000Base TX,CAT5/CAT6
Dimension
85(H)×25(W)×25(L)mm 190(H)×85(W)×48(L)mm 482(H)×86(W)×44(L)mm 83(H)×25(W)×25(L)mm
Interface form RJ45
IP code(IEC EN 60529) IP20
Error rate ≤10-12
Material/color Aluminum/Blue
Insertion loss ≤.3.0dB
Working conditions Temperature: -40 to 85℃, Relative humidity: ≤95％
If you need any kinds of lightning protector, please contact us, as a professional lightning protector supplier, Techwin is willing to offer you high quality products.
Other supplier products
|
|
Signal SPD |
Signal surge protective device(SPD) is actually a signal lightning arrester, which is installed in series in the signal transmission line, usually ... |
|
|
DC Power SPD |
DC power supply SPD, also called DC lightning arrestor or DC surge suppressor, is designed for the protection of DC power circuit from the damage o... |
|
|
Single phase 24V series power surge protector |
Widely used in industrial control systems, lightning protectors are connected in series in the power circuit to prevent surges from invading the eq... |
|
|
SPD for Ethernet Power System |
The POE Ethernet series lightning protection device is a lightning protection device developed for POE network power supply equipment in accordance... |
|
|
2 in 1 SPD for CCTV |
2 in 1 monitor cctv lightning surge protectors(power and network/ power and video/ power and control), is designed for a digital camera to protect ... |
供应产品
Same products
