BM6 High Pressure Motor
What is BM6 high pressure hydraulic motor?
BM6 hydraulic motor is a face-end flow, pressure-compensated motor, mainly composed of output shaft, front cover, bearing, long linkage shaft, bearing housing, stator and rotor pair, valve disc, small linkage shaft, distribution plate and preloading spring. This disc valve hydraulic motorfeatures low speed and high torque. The motor has a six-toothed cycloidal rotor, which is installed in the middle of the stator and meshes with the stators of the seven arc teeth to form seven sealed spaces; 12 holes on the distribution plate, 6 of which are combined with the oil. The mouth is connected, and the other six are connected to the back (in) port. The seven holes auxiliary distribution plates on the valve disc form a seven volume chamber with the cycloidal rotor.
Characteristic Features of BM6 High Pressure Motor:
BM6 is a large volume, disc valve, high pressure motor, with ball-bearings design, and can bear big load, and has higher torque than BM5. Advanced design in disc distribution flow, which can provide improved performance at low speed. The valve can automatically compensate for the wear, so the volumetric efficiency is high. Double taper roller bearings permit high radial loads. The motors can be used on heavier vehicles in traction drive applications
JC forging, as an excellent forged components manufacturer, offers a wide range of custom metal forgingsfor you to choose from.
Send product request
Other supplier products
 |
BM2 Hydraulic Spool Valve Motor | What is BM2 Hydraulic Spool Valve Motor? BM2 motor is a spool valve type motor. Characteristic Features of BM2 Hydraulic Spool Valve Motor: 1,... |
 |
BM1 Small Hydraulic Motor | What is BM1 Small Hydraulic Motor? The BM1 is a small, spool valve type gerotor motor. The characteristics of BM1 small hydraulic motor are as fol... |
 |
Small Excavator Series Cylinders | What is mini excavator hydraulic cylinder? These cylinders are mainly for small excavators, including stick cylinders, boom cylinders, bucket cylin... |
 |
BM6 High Pressure Motor | What is BM6 High Pressure Hydraulic Motor? BM6 hydraulic motor is a face-end flow, pressure-compensated motor, mainly composed of output shaft, fro... |
 |
Hydraulic Cylinder Forgings | Hydraulic cylinder is a hydraulic execution element that converts hydraulic energy into mechanical energy and performs straight-to-turn motion (or... |
Same products
 |
Structural Steel Pipe Wholesale Exporter | Seller: STEEL SEARCHER HONG KONG LIMITED | Steel Searcher-Steel Pipehaving a hollow section much longer than its diameter or circumference. ... |
 |
Medical Instrument Parts from PTFE | Seller: DONGGUAN SIBAI METAL WORKS LIMITED | Medical Machined Partsfrom PTFE Sibai ensures High quality, short lead time, and on-time deliver... |
 |
METAL FLANGING | Seller: Wuhu Hunkmachining Accessory CO.,Ltd | Flanging refers to the stamping process of turning the edge or outer edge of the hole on the work... |
 |
AJ25 Abrasive Cloth | Seller: ZIBO RIKEN MT COATED ABRASIVES CO., LTD. | RIKEN RMC Jwt cloth AJ25, the Jwt poly-cotton cloth with the calcined aluminum oxide, is flexible... |
|
|
BM6 High Pressure Motor | Seller: Hebei Golden-hammer forgings co., ltd | What is BM6 high pressure hydraulic motor? BM6 hydraulic motor is a face-end flow, pressure-comp... |
