ACREL ACR10R-D16TE PV INVERTER METER WITH POWER MONITORING
ACR10R-D16TE PV inverter meter with power monitoring is suitable for energy-saving renovation projects in high-energy-consuming industries such as smelting, steel, electric welding, and semiconductors. It is also suitable for power monitoring and power demand-side management of distributed photovoltaic grid-connected cabinets. It integrates the measurement of all power parameters (such as single-phase current, voltage, active power, reactive power, apparent power, frequency, power factor), as well as power monitoring and assessment management.
Specification of Acrel ACR10RD16TE4PV Inverter Meter With Power Monitoring
Technical parameters |
Indicators |
||
Input |
Grid |
Single-phase |
|
Frequency |
45~65Hz |
||
Voltage |
Rated voltage: AC 100V, 400V |
||
Overload: 1.2 times the rated voltage(continuous); 2 times the rated voltage lasting for 1 second |
|||
Power consumption: less than 0.2VA |
|||
Current |
Rated current: 10A,20A,40A,80A,120A,200A etc. (for details see product specifications) |
||
Overload: 1.2 times the rated current(continuous);10 times the rated current lasting for 1 second |
|||
Power consumption: less than 0.2VA |
|||
Output |
Communication |
RS485 interface, Modbus-RTU |
|
Display |
LCD |
||
Measurement precision |
Voltage: 0.2 level, current, power Active energy: 0.5 level,0.01Hz frequency, Reactive energy: 1 level |
||
Power supply |
AC85~265V or DC100~350V; power consumption ≤10VA |
||
Safety |
Power frequency withstands voltage |
AC2kV 1 min between power supply // current input//voltage input and communication |
|
AC2kV 1 min between each pair of combinations among power supply, current input, and voltage input. |
|||
Insulating resistor |
Input, output terminal to housing >100MΩ |
||
Environment |
Working temperature: -10℃~+55℃;storage temperature: -20℃~+70℃ |
||
Relative humidity:5%~95%,non-condensing; altitude:≤2500m |
Features of ACR10R-D16TE PV Inverter Meter With Power Monitoring
01
It has the characteristics of no need to disassemble the busbar once, simple and convenient wiring, safe construction, saving transformation costs and improving efficiency for users;
02
It has a variety of peripheral interface functions for users to choose: it has RS485 communication interface, using MODBUS-RTU protocol to meet the needs of communication network management;
03
With switch input and relay output, it can realize the functions of "remote signaling" and "remote control" of circuit breaker switch. It adopts LCD display interface, and realizes parameter setting and control through panel buttons, which is very suitable for real-time power monitoring system.
If you want to know more different smart meters, please visit our website.
Send product request
Other supplier products
ACREL ACR10R-D16TE PV INVERTER METER WITH POWER MONITORING | ACR10R-D16TE PV inverter meter with power monitoring is suitable for energy-saving renovation projects in high-energy-consuming industries such as ... | |
ACREL AMC72-DV DC VOLT METER | ACREL AMC72-DV DC VOLT METER AMC72-DV small dc voltmeteris often used in DC motor drive circuits, battery charging circuits, battery testing, etc.... | |
AHKC SERIES HALL EFFECT SENSOR | The differential hall effectsensor is made according to the principle of the Hall effect, and the Ampere's law is applied at the same time,that i... | |
ACREL ALP300-25 MOTOR OVERLOAD PROTECTION DEVICE WITH ALARM OUTPUT | ACREL ALP300-25 MOTOR OVERLOAD PROTECTION DEVICE WITH ALARM OUTPUT ALP300-25 motor protective relay, motor monitoring relay, motor overcurrent rel... | |
AGF-AE SERIES PV/SOLAR INVERTER ENERGY METER | AGF-AE Series PV/Solar Inverter Meter, as the key components of anti-backflow detection, adopts high-performance MCU and high-precision metering ch... |