Rod breakdown machine
The machine is used for drawing electrical copper rod from 8.0mm to 1.2-4mm, which can be annealed before the outlet wire is wound by the dual take up device or coiler.
1 Ironed cast .Horizontal structure, dual driving motors , which main drawing machine and fix-speed are driven separately, owning rapidly change system..
2 The capstan is coated with tungsten carbide power, which is strong .
3 High precision gear transmission , high efficiency , low noise.
Other supplier products
|
|
Steel wire drawing machine |
Machine type 560
Drawing dies 6
Inlet diameter Φ6.5 mm
Outlet diameter Φ2.6 mm
Main motor(kw) 18.5
machine weight(kg) 10800
speedm/min 245
B... |
|
|
Fine wire drawing M/C with continuous annealer |
Machine type JCJX-24DA
Control system Traditional analog type/By computer digital control
Inverter control Dual Inverter control
Drawing dies No... |
|
|
Intermediate wire drawing M/C with annealer |
Machine type JCJX-9DT Control system Traditional analog type Inverter control Dual inverter control Drawing dies No./max. 9 Inlet diameter 2.5- 3.5... |
|
|
Rod breakdown machine |
The machine is used for drawing electrical copper rod from 8.0mm to 1.2-4mm, which can be annealed before the outlet wire is wound by the dual take... |
|
|
Rigid frame stranding machine |
The machine is suitable for stranding long length and section bare aluminium,copper and aluminum alloy.
A The machine is suitable for stranding lo... |
All supplier products
Same products
