Corrugated Web H-beam Welding Line
The corrugated web beamautomatic welding machine adopts the welding robot originally from Italy which automatically controls the works such as the whole Line laser scanning, two positions welding, welding gun changing, crosssection cutting and so on. This machine has the features of high quality, high efficiency, full-automation and so on.
It can cut, assemble and weld the tapered beam. The welding speed of this production line is about 700 mm/min (max. projected linear average speed). For the raw materials to feed into the machine, load the suitable coil onto the decoiler or simply feed the flat plate are both OK.
The length, height and thickness the machine can produce:
H-beam length: 4-16 m
H-beam height: 300-1500 mm
Corrugated web thickness: 2-6 mm(≤235 MPa), 2-4 mm(≤345MPa)
H-beam flat web thickness: 4-8 mm
Video of Corrugated Web H-beam Welding Line
Corrugated web H-beam is a new construction materials. It is widely used in bridge, column, single and multiple bay frame construction. The surface is corrugated, and it can save steel 20%~60% under the same yield strength with each beam with flat webs, especially it has high cost performance in large span, crane beam, and so on. The span of 1.5 meters H-beam with corrugated webs can reach 40 meters. The JBH automatic corrugated web H-beam welding line is developed by Zhejiang Jinggong Science & Technology Co., Ltd.. The H-beam with corrugated webs use the original binding welding robot from Italy with automatic control to finish the work such as whole line laser scan, two positions welding, changing welding gun, cross-section cutting, and so on.
The machine has high quality, high efficiency, full automation, and so on. It consists of slitting and cutting length devices, web panel forming machine, flange web feeding machine, h-beam with corrugated webs robot automatic welding machine, variable cross-section cutting, stacking system, and so on.
In order to promote the use of H-beam with corrugated webs. Zhejiang JinggongScience & Technology Co., Ltd., Tongji University in Shanghai, Open Steel Structure, and other companies made the product standard for the industry. And in september 2010, it passed the review.
Parameter OfCorrugated Web H-beam Welding Line
Item |
Parameter |
|||||
Corrugated web forming machine |
Suitable raw material |
Yield strength(Mpa) |
≤345 |
|||
Steel thickness(mm) |
2-6(≤235Mpa): 2-4(≤345Mpa) |
|||||
Steel width (mm) |
350-1500 |
|||||
Profile dimension |
Wave height(mm) |
40-50 |
||||
Distance of waves(mm) |
(About)155 |
|||||
Steel feeding mode |
Conveyor |
|||||
Corrugate web output mode |
Transmission chain |
|||||
Feeding power(kw) |
30 |
|||||
Total weight (T) |
(About)11 |
|||||
Dimension (mm) 6235×1640×2500 |
||||||
Corrugated web H-beam automatic robot welding machine |
Work-piece dimension (mm) |
Work-piece length |
4000-20000 |
|||
Web thickness |
2-6 |
|||||
Webheight |
350-1500 |
|||||
Flange thickness |
10-30 |
|||||
Flange width |
150-500 |
|||||
Welding mode |
Imported robot two-position welding at the same time |
|||||
Welding type |
CO2 welding |
Corrugate scanning |
Whole line laser scanning |
|||
Cutting type |
Plasma cutting |
Control mode |
Automatic control |
|||
Scanning speed (mm/s) |
≥600 |
Welding speed(mm/min) |
||||
Total power (kw) |
132 |
|||||
Dimension(mm) |
24000×6500×3500 |
|||||
Total weight(T) |
(About)41 |
|||||
Total power (kw) |
195(Except slitting/cutting line) |
|||||
Total weight (T) |
86(slitting/cutting line) |
|||||
Dimension (mm) |
67550×8500×3500(Except slitting/cutting line) |
Special features about Corrugated Web H-beam Welding Line
Send product request
Other supplier products
C/Z Purlin Roll Forming Machine | The c purlin forming machinecan form hot/cold rolled metal strip through leveling, cold roll forming, punching and cutting off to produce C type or... | |
The Core Equipment of Automated Three-dimentional Warehouse: Stacker Crane | Tracked roadway stacking crane, a special crane developed with the appearance of three-dimensional warehouses, referred to as stacker crane. It is ... | |
Basic Situation of the Building Materials Machinery Industry | Ⅰ. Basic situation of the industry economy In the face of fierce market competition, the building materials machineryindustry has seen positive a... | |
Slitting Line | This sheet metal slitting line machineis special equipment for uncoiling, slitting and recoiling the steel sheet according to the requirement of th... | |
Seamer | Our panel seameris the auxiliary equipment that is specially designed for overlapping and seaming panels for roll forming machines. It is easy to o... |
Same products
Corrugated Web H-beam Welding Line | Seller: Zhejiang Jinggong Science & Technology Co., Ltd. | The corrugated web beamautomatic welding machine adopts the welding robot originally from Italy w... | |
eva compound sponge | Seller: Changzhou DayeTengfei Sponge Co.,Ltd | Listing Description feature Abrasion resistance, toughness, anti-vibrationUses packagingIndu... |