Walk In Test Chamber For CATL Battery

• 

CATL Battery Walk In Test Chamber
JOEO Walk In Test Chamber's temperature cyclic stress screening is to change the external environmental stress by using the temperature acceleration technique (the product produces alternating expansion and contraction when circulating in the upper and lower extreme temperatures) under the design strength limitation, so as to generate thermal stress and strain in the product.
It can set different stress screening temperature change rate.If you need more models about our test equipment, please reference our chamber-testing（.）com 5℃/min,10℃/min,15℃/min,20℃/min
Walk In test chamber(ESS chamber) is suitable for the whole product, parts and materials for high temperature, low temperature, high and low temperature cycling & temperature stress screening (ESS) test and constant humidity and cyclic damp heat test.

Meeting standards
MIL-STD-2164, MIL-344A-4-16, MIL-2164A-19, NABMAT-9492,GJB-1032-90, GJB/Z34-5.1.6, IPC-9701

SAFETY IN THE LABORATORY AND PROTECTION OF THE STAFF
During the temperature tests, overchargings or malfunctions of the batteries may occur. This can lead to the destruction of the batteries.

Increasing storage sizes cause increasing impacts of possible failures and potential risks during tests with lithium batteries. For this reason, safety in the laboratory, in particular the protection of the staff, during such tests has the highest priority.

To assure this safety in your lab chamber during tests with lithium batteries in a temperature- or environmental humidity chamber, we can offer safety devices. Here, JOEO BatteryWalk In Test Chamber following customers demand that the safety test chambers can be adapted individually, Please feel free to inquiry from us online!

JOEOSPECIAL ADD-ON COMPONENTS CAN BE SUPPLEMENTED FOR TESTING LITHIUM-ION BATTERIES
Electrical door lock system
Optic and acoustic alarm
Pressure release flap
N2 – Inertia Unit
O2 – Measuring (additional option for N2 – Inertia)
Fire detection system using a CO gas detection sensor
Fire detection via temperature measurement (alternative)
Flushing device using in case of fire
Over pressure release via burst disc including reinforced inner container

REFRIGERATION SYSTEM
In the process of cooling, from 150℃ we just turn on the first compressor, when the temperature down to 17℃, the second compressor will start to work.In this way, we not only can guarantee the cooling rate, but also energy saving, and extend the life of the compressor.
JOEO Battery walk in test chamber's Compressors equipped with world famous brand such as Tecumseh (France made), Bitzer or GEA BOCK (Germany made).
Shock absorption and noise reduction process,slow down the vibration, protect the compressor.The new pipe bending technology: The bending process can minimize the connector point and make refrigerant flow more efficiently.
It applies Denmark DANFOSS and Japanese SAGLNOMIYA solenoid valves to improve the overall reliability of the equipment.

Other supplier products

	Salt Spray Test Machine- ISO 9227 SST Chamber	Applicable JOEO Salt Spray Test Machine heating adopts titanium alloy electric heating tube. It has high corrosion resistance and long service life...
	Thermal Shock Test Chamber (2 Zone)	Application Mainly used in aviation, aerospace, military units, electronics, IT industry and other test products in the surrounding atmospheric tem...
	Ozone Aging Test Chamber	Introduction JOEO ozone aging test chamber through the simulation and enhancement of ozone conditions in the atmosphere, to study the impact of ozo...
	IEC 60068 Salt Fog Chamber of Cyclic Corrosion Salt Spray Chamber	Applicable JOEO Cyclic corrosion salt spray chamber,salt spray chamber is tested the corrosion resistance capacity of products, which stay in the i...
	Medicine Drug Photostability Test Chamber	应用 JOEO光稳定性试验箱、光稳定性试验箱、综合药物光稳定性试验箱（带紫外监测和控制），在原有MSC-THLPTHLTL综合温度稳定性试验箱的基础上增加了可见光和紫外光的监测和控制，是制药、化妆品企业进行GMP认证的必备设备。 满足 ICH 指南中的光学稳定室条件。 适用于制药企业对药品...

Same products

	Walk In Environmental Chamber	Seller: Guangdong ALI Testing Equipment Co,.Ltd	Application JOEO Multi-functional walk in environmental chamber is the perfect testing place for ...
	Solid Walk In Test Chamber	Seller: Guangdong ALI Testing Equipment Co,.Ltd	Application: JOEO solid walk in test chamber is an all-welded test chamber with an integrated con...
	Compact Walk In Environmental Chamber	Seller: Guangdong ALI Testing Equipment Co,.Ltd	Application JOEO compact walk in environmental chamber is used to test full-size solar panels or ...
	Drying Walk In Environmental Chamber	Seller: Guangdong ALI Testing Equipment Co,.Ltd	Application Dry walk in environmental chambers are a special type of walk in environmental chambe...
	Walk In Test Chamber For CATL Battery	Seller: Guangdong ALI Testing Equipment Co,.Ltd	CATL Battery Walk In Test Chamber JOEO Walk In Test Chamber's temperature cyclic stress screening...