TPU Slip Masterbatch & Frosted Matte Masterbatch for Engineering Plastics
Anmei company specializes in the production of TPU slip masterbatchingredients and TPU frosted matte masterbatch excellent dispersibility in cast films. Casting film can be compounded with plastic woven cloth during production to be used as shade cloth and tourist tents.
TPU anti-block masterbatch is designed to prevent blocking during the extrusion of thin TPU film and improves the bound ability of TPU film.
Problem & Solution of Masterbatch Application in Cast Film
Problem1:
Moisture in the tpu masterbatchor poor heat resistance of the ingredients will cause the cast film to have a network structure.
Solution1:
Appropriately reduce the temperature of each zone and dry the masterbatchin the cast film production process.
Color masterbatch should bechosen pigments with high color strength and good heat resistance,andthen strengthen the blowing, and appropriately increase the water temperature.
Problem2:
The low content of titanium dioxide in the film will lead to the poor hiding power of the cast film.
Solution2:
Increasing the amount of masterbatch
Increasing the content of titanium dioxide in the masterbatch
Problem3:
Poor pigment dispersion leads to colored spots on the cast film.
Solution3:
Choosing masterbatch with good dispersibility ingredients.
Problem4:
The volatile matter in the masterbatch causes smoke during processing.
Solution4:
Reducing the extrusion temperature
Choosing high-temperature resistant masterbatch
Suzhou ANMEIMaterial Technology Co., Ltd. – the professional supplier of engineering modified plasticand the color masterbatch was founded in 2013, which is located in Tongli - the millennium ancient town, 50km far away from Shanghai, the location is very convenient for transportation.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
PA6 GF30 Halogen-free FR (A1015F) for Engineering Plastics | PA6FRis a PA6 with 30% glass-fibers and flame retardant free of halogens. Typical Application of PA6 GF30 halogen-free FR (A1015F) PA6 GF30flam... | |
Nylon 66 Pa66 With High Tensile Strength (A2307X01, A2317X01) for Engineering Plastics | UsingPolyamide 66 as the basic resin, the tensile strength of nylon 66is obtained by blending and modifying with the addition of a toughening agent... | |
TPU Slip Masterbatch & Frosted Matte Masterbatch for Engineering Plastics | Anmei company specializes in the production of TPU slip masterbatchingredients and TPU frosted matte masterbatch excellent dispersibility in cast f... | |
Antibacterial Masterbatch for Engineering Plastics | Polymer anti-bacterial masterbatch is a kind of masterbatch material that adds antibacterial agents into the carrier resin, which is offering antim... | |
PA6 GF30 Heat Stabilized (A1006F, A1016F) for Engineering Plastics | AnmeiA1006F is a kind of material PA6 GF30, which is the injection grade resin by mixing the 30% glass fiber and heat stabilized polyamide 6. Typi... |