Frog and Switch Point Grinder

• 

The NCM-4.0 frog&switch point grinding machine is the most economical machine in the market for your turnout maintenance and repair, it can be used to grind frog, switch points, switch cores, top and side flashes of guard rails, and can also grind the rail flashes of crossovers and standard rails.

It can be tilted by 36° from the vertical direction to the left and right, and the position of the grinding wheel can be adjusted along the vertical and horizontal directions. So that the grinding device of the machine can work very accurately in the narrow space between the rails. According to customer needs, Honda GX160 or GX200 gasoline engine can be selected as power, and the installation dimensions of the two engines are the same.

Другие товары поставщика

	Digital Rail Head Wear Gauge	Rail wear gauge（rail head loss gauge also call it rail profile gauge）is mainly used to measure the vertical wear and lateral wear of the rail.The r...
	Rail Opening Gauge	Rail opening gauge is mainly used for measuring turnout opening and offset gauge. Small design and convient to use for some special meauring po...
	Contact Rail( Third Rail) Gauge	Contact railgauge, also called third railgauge, is a special measuring instrument for measuring the guide height of contact rail (the vertical ...
	Internal Combustion Rail Drilling Machine	This machine is an indispensable tool for railway maintenance, construction and emergency repair operations. It uses a hollow drill bit, fast clamp...
	Frog and Switch Point Grinder	The NCM-4.0 frog&switch point grinding machine is the most economical machine in the market for your turnout maintenance and repair, it can be ...

Похожие товары

	Digital Rail Ultrasonic Flaw Detector / Railway flaw inspection device	Продавец: Wuhan Linkage Track Equipment Co,Ltd	Ultrasonic Rail Flaw Detector GT-20 rail flaw detector is the third generation of fu...
	Railway Switch Opening Gauge for Turnout Measuring	Продавец: Wuhan Linkage Track Equipment Co,Ltd	Rail Opening Gauge JG-KC01 Rail opening gauge is mainly used for measuring turnout op...
	Wheel Back to Back Distant Measuring Gauge	Продавец: Wuhan Linkage Track Equipment Co,Ltd	Wheel Back-to-back Distance Gauge Wheel back to back distance gauge is used to mea...
	Welding and Track Maintenance Equipment /Welder Rail - a Frame Aligners	Продавец: Wuhan Linkage Track Equipment Co,Ltd	Welding and Track Maintenance Equipment /Welder Rail - a Frame Aligners GDJ-I Rail Ali...
	Rail Laser Alignment Device for Rail Measurement work	Продавец: Wuhan Linkage Track Equipment Co,Ltd	Rail Laser Alignment Device Laser Alignment Device is used for measuring track level and...