SCRAPED HEAT EXCHANGER
The scraped surface exchangersis a heat exchanger that uses the scraper to stir the liquid material and clean the heat transfer surface to speed up the heat transfer efficiency. The scraper heat exchanger is not only suitable for low viscosity liquid material, but especially suitable for fast heat transfer of high viscosity or granular liquid material. Due to the large viscosity or slow flow of high viscosity feed liquid, in ultra-high temperature sterilization treatment, the heat transfer surface of general heat exchanger is easy to generate coking film, and scraped surface heat exchanger is the most suitable. Before the mechanical design of the scraper heat exchanger, the physical properties of the feed liquid, the flow pattern of the feed liquid in the heat exchanger, and the characteristics of heat transfer must be studied, and the heat transfer coefficient, average temperature difference, and fluid resistance must be calculated. Only by obtaining the design parameters necessary for structural design can the production process be continuous and the treatment process meet the requirements.
Typical Application of Sunkaier Scraped Heat Exchanger
It is widely used in metallurgy, mining, petroleum, chemical industry, electric power, medicine, food, chemical fiber, paper making, light textile, shipbuilding, heat supply and other departments, and can be used for heating, cooling, evaporation, condensation, sterilization, waste heat recovery and other situations.
As a professional process equipment manufacturers, has high-quality chemical process equipmentfor sale. Welcome to contact us if needed.
Send product request
Other supplier products
MAGNETIC AGITATOR SK1000 | Magnetic seal comprises of a sealed chamber (Shroud), which contains a rotating Inner Shaft, which is embedded with powerful Inner Magnets. This in... | |
SCR PLANT | SCR Plant Selective Catalytic Reduction(SCR) System basically reverses the process used to make urea. A urea solution is fed into a reactor, where... | |
POLYMER AGITATOR | When the material in the polymerization reactor is a homogeneous system, the viscosity of the material increases significantly with the increase of... | |
LIGHT DUTY AGITATOR SK100 | Side entry agitatoris installed on the equipment side of the cylinder wall and adopt axial-flow impellor, the operating and side entry agitator cos... | |
OIL REFINERY REACTOR | Crude oil is a mixture of hydrocarbons. It is a thick, dark brown liquid. Using crude oil directly is wasteful, so the components need to be separa... |
Same products
CUSTOM FABRICATED REACTORS | Seller: Xi'an United Pressure Vessel Manufacturing Co., Ltd. | UPVis an industry leader in the custom design and fabrication of reactors for chemical and petr... | |
CUSTOM FABRICATED REACTORS | Seller: Xi'an United Pressure Vessel Manufacturing Co., Ltd. | UPVis an industry leader in the custom design and fabrication of reactors for chemical and petr... | |
SMILE-S6-HV | Seller: Alpha ESS Co., Ltd. | SMILE-S6-HV 6 kW5 - 30.0 kWh / 8.2 - 49.2 kWh This is the 6kw battery storagesystem equipped wi... | |
SCRAPED HEAT EXCHANGER | Seller: Jiangsu Sunkaier Industrial Technology Co., Ltd. | The scraped surface exchangersis a heat exchanger that uses the scraper to stir the liquid materi... | |
MEDIUM DUTY SHELVING RACK 300KG | Seller: Guangzhou Maobang Storage Equipment Co.,Ltd | Using steel laminates, columns and beams, the entire medium duty shelving300 KG is not connected ... |